Re: [CR]Weimann


Example: Framebuilders:Mario Confente

From: Huemax@aol.com
Date: Sun, 25 Nov 2007 18:14:51 EST
Subject: Re: [CR]Weimann
To: CPOTZ@aol.com, classicrendezvous@bikelist.org


In a message dated 11/25/07 3:51:23 PM, CPOTZ@aol.com writes:


> I just wondered if any list members have any detailed information on the  
> Weinmann company, like when they started etc. I know they were around in  
> 1952
> but wondered if anyone had anything else on this often overlooked and 
> sometimes
> snubbed component supplier.
>

Hi Steve,

I have a of pieces of info. When I was in Japan, in mid 60', Japanese part s maker was very hard in thier works to catch up with European manufacturers.

The Yoshigai Kinzoku Company, (Ysohigai Metal Works), who later made DIA-COM P

was buying (or working together) some kind of permission to mold same shape brake calipers (side-pull as well as center). Then, all parts were idntical.

I have a special brake caliper adjusting tool/wrench (2-pieces) saying DIA-WEINMANN on them.

I have seen Made in Switzerland staping as well as Belgim, but not Made in Japan though.

KEN TODA, High Point, NC

************************************** Check out AOL's list of 2007's hottest products.

(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)