[CR]Re: MAFAC Brakeset ID?

(Example: History)

From: <TADCPDAJD@aol.com>
Date: Sat, 17 Feb 2007 19:17:14 EST
To: classicrendezvous@bikelist.org
Subject: [CR]Re: MAFAC Brakeset ID?

I asked about some unusual MAFAC brakes at ebay auction number: 330086337470

and Jerry Moos responded:

Those look to me like later Competitions. The early ones were engraved "Competition", but later ones had a foil sticker which may have come off these.

Jerry, The subject caliper arms do not appear to be as rounded or as well finished as the later Competition models, although the straddle cable-end receivers (which were changed to this type in the later models) are similar to the auction
   brakes. Model 2000 and Model S also had this type of receiver (see Robert Broderick's scans of MAFAC posters at Wooljersey, and as previously noted, similar to the Weinmann and Universal calipers). Additionally, none of the Competition models with the stickers that I have seen have had the MAFAC name stamped into the caliper arm, too. And to pursue that line of thought a step further -- I can't think of any of the MAFAC center pull models (other than the original Dural Forge) that had the name MAFAC stamped in the middle of the caliper arm. Summing up my dismay: the stamping looks like pre "RACER" Racers, the straddle cable receivers look like late Competition (or 2000, and the levers are remeniscent of 2000s, too), and the black plastic bushings and the overall finish seem like "S" model quality. So I was quite confused. Thank you for noting the foil stickers, but even those were bedded in an indentation in the arm which is not present on these brakes (Jan Heine speculated that it would be easy to file down the arm to eliminate the remnants of the foil sticker bed, but that still doesn't explain the presence of the stamping). Tom Donahue Melbourne, FL