Hey guys,
I could be missing something here and perhaps even my explanation doesn't make complete sense but here goes anyway. C-Record and Victory for sure have that left handed thread because they came with one-key releases. It seems to me that by reverse threading they insured that the cap couldn't loosen as the captured bolt turned against it...
Doug Van Cleve Chandler, AZ USA
On 3/23/07, Mark Bulgier <Mark@bulgier.net> wrote:
> Baron von Drais wrote:
> >
> > I have available 23mm TA Specialties crank pullers
>
> That's a good deal Peter is offering, but it's important to know that
> you should _not_ use it on classic Stronglight cranks. Their
> remover/dustcap thread is 23.35mm, close enough to 23mm to fool you into
> thinking the TA remover will work, but just enough bigger to strip the
> threads on the crank when you start crank yanking.
>
> Actually the TA-size remover has been known to work sometimes on the
> Stronglight cranks without stripping, but probably damages the threads
> at least a little even when it appears to work.
>
> This is not based on just my own observations - I have heard the tales
> of woes from many people over the years - don't do it! Only use a real
> Stronglight remover or the ones made to fit 23.35, like VAR and Stein.
> Note, the common Park brand double-sided remover is 22mm and 23mm and
> should also not be used on old Stronglight.
>
> The real Stronglight-brand remover has the added advantage that the
> included socket wrench is 16mm to fit the bolts that were supplied
> originally with those cranks. (Many people changed those out for 15 or
> even 14mm bolts, but I like to keep 'em original myself, for no logical
> reason)
>
> Just to complicate things a bit more, Stronglight later went to a 22mm
> remover thread, same as Campy et al. Luckily there's no mistaking that
> for anything else, there aren't any other removers close enough to 22 to
> fool you. Whoops, except for the C-Record left-hand-threaded 22mm
> remover I guess -- here's hoping you never run into one of those stupid,
> justifiably-rare abominations <shudder>
>
> Mark Bulgier
> Seattle WA USA