Re: [CR]Beautiful rare valuable stem stuck in crap bike.

(Example: Framebuilding:Restoration)

References: <11ed03cf64634b3e5958497903f3d6a1@comcast.net>
To: biankita@comcast.net
Subject: Re: [CR]Beautiful rare valuable stem stuck in crap bike.
Date: Thu, 26 Apr 2007 17:19:02 -0400
In-Reply-To: <11ed03cf64634b3e5958497903f3d6a1@comcast.net>
From: <oroboyz@aol.com>
cc: classicrendezvous@bikelist.org

<< Wouldn't you know it, some jerk apparently hammered the wrong size stem into the steerer tube?>>

No, that steerer is the largest "hole" made in that era.

Have you used "Kroil"? absolutely great stuff.. but it would logically take 3-4 days of applications, soaking, tapping with hard rubber hammer, etc.

<< The shop owner says a torch, but this qualifies as a special case because the stem is aluminum and so is the pitifull frame. >>

The fork steerer, what the stem is really stuck in, is steel... hacksaw the frame away from the fork and steerer. Then use heat on the steerer. Not enough to melt the stem (doh!) but to loosen all the gunk. Clamp the fork crown in a big vise, then put some bars in the stem and start twisting and pulling...

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina 27408 USA 336.274.5959 http://www.cyclesdeoro.com http://www.classicrendezvous.com -----Original Message----- From: biankita@comcast.net To: classicrendezvous@bikelist.org Sent: Thu, 26 Apr 2007 4:55 PM Subject: [CR]Beautiful rare valuable stem stuck in crap bike.

A local bike shop owner wants to gift me a TTT pantographed Colnago stem in the perfect 10 cm size that I use. The pantographing seems unusual in that it is a shade deeper into the aluminum surface. The stem is stuck in one of those crack addict's bikes. This one is an old ALAN that has a crack in the headtube, part of the seat lug cracked off on the tightening fixture, a crack in the downtube, a bent crank, rusted and corroded Zeus brakes, etc. The only things worth saving are the SR headset and the stem. Wouldn't you know it, some jerk apparently hammered the wrong size stem into the steerer tube? We have had it soaking in every kind of thing for two days and we can't even turn it one bit no less get it out. I tried sticking a solid metal rod into the fork from underneath and tapping it to break the stem loose. Even that won't work. Short of cutting the head tube and then cutting the fork in half what might be done. The shop owner says a torch, but this qualifies as a special case because the stem is aluminum and so is the pitifull frame.

Garth Libre in Miami Fl USA

_______________________________________________
   Classicrendezvous mailing list
   Classicrendezvous@bikelist.org
   http://www.bikelist.org/mailman/listinfo/classicrendezvous