i did this with a dura ace hub i got...i had to move to one cross lacing from radial lacing since i used an aero rim and the ERD was different...i reused the nipples too, but nipples are real cheap so i would replace them if i were you. i also used some light sandpaper to polish/clean the bladed spokes.
if you want to reuse spokes your new rim needs to be real close in profile to the old one and you should keep spoke orientation the same...as in leading stays leading and trailing stays trailing. nipples are inexpensive...butted spokes are reasonable and bladed spokes are expensive.
Jeff Piwonka austin, texas, usa
--- Anthony Bier <scratcheduprecord@hotmail.com>
wrote:
>
>
> I want to swap the suntour superbe pro hubs out of a
> set of 32H tubular wheels (campy rims) for a set of
> Record hubs, assuming the dimensions are more or
> less the same and I use new nipples is there any
> danger in doing this? I want the bike to be all
> campy and the hubs are the only thing holding me
> back, but if I have to spend $45 on new straight
> gauge spokes I don't see it being worth it since
> functionality won't change. Additionally, the spokes
> are bladded (i know sort of off topic) and I like
> them and I don't want to know how much new bladded
> or butted spokes would cost. I am asking here
> because I am sure this delima has come up with all
> the people here restoring vintage bikes.
>
> thanks
>
> Anthony Bier
>
> Vancouver, BC
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------------
> Fine Dining & Fancy Food.
> ------------------------------------------
> Check Out This Collection Of Restaurants
> ------------------------------------------
>
> ------------------------------------------
>
>
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
>
http://www.bikelist.org/
>
_______________________________________________
Classicrendezvous mailing list
Classicrendezvous@bikelist.org
http://www.bikelist.org/