RE: [CR]track hub lockring size required

(Example: Events:Eroica)

Date: Tue, 11 Sep 2007 15:42:48 -0700 (PDT)
From: "jeffrey piwonka" <jmpiwonka@yahoo.com>
Subject: RE: [CR]track hub lockring size required
To: classicrendezvous@bikelist.org
In-Reply-To: <BAY106-F33B9A31C90FAF47EDF3A00ACC10@phx.gbl>


phil wood lockrings are campy thread pitch and size.

jeff piwonka
austin texas usa


--- greg piwonka wrote:


> i think you can get phil wood track lockrings with a
> campy thread.
> greg piwonka
> austin tx
>
> >From: "CyclArt Shop" <shop@cyclart.com>
> >Reply-To: shop@cyclart.com
> >To: "Wayne Davidson" <wayne.collect@xtra.co.nz>,"CR
> List"
> ><classicrendezvous@bikelist.org>
> >Subject: RE: [CR]track hub lockring size required
> >Date: Tue, 11 Sep 2007 14:59:00 -0700
> >
> >Wayne,
> >If the lockring on your Campagnolo hub was a BB
> lockring, then it was a
> >road
> >hub, not a track hub. English BB and freewheel
> thread is the same (1.37" x
> >24 tpi.) Track lockrings are always smaller than
> the cog thread, and ALWAYS
> >left-hand threaded.
> >
> >Campagnolo uses their own lockring thread, and I
> don't believe anyone else
> >uses it. It is 1.32" x 24tpi LH thread.
> >
> >Most track hubs are English thread. They use a
> 1.29" x 24 tpi LH threaded
> >lockring.
> >
> >French are 33 x 1.0mm LH thread.
> >
> >If you can't find a track hub but want to ride a
> fixed gear, you can often
> >fit a BB lockring over a cog on a freewheel hub,
> and respace the axle to
> >the
> >right chainline. Loctite or equiv. is a good idea
> with this setup, and so
> >is
> >a rear brake. It seems to work ok as long as you
> don't try to stop with
> >pedal pressure. If you spin off your cog doing so,
> you will be in a world
> >of
> >hurt.
> >
> >Greg Reiche
> >CyclArt
> >Vista, CA USA
> >shop@cyclart.com
> >www.cyclart.com
> >http://ebay.com/<blah>
> >
> >-----Original Message-----
> >From: classicrendezvous-bounces@bikelist.org
> >[mailto:classicrendezvous-bounces@bikelist.org]On
> Behalf Of Wayne
> >Davidson
> >Sent: Tuesday, September 11, 2007 12:16 PM
> >To: CR List
> >Subject: [CR]track hub lockring size required
> >
> >
> >Hi all, I recently bought a Campagnolo rear track
> hub, the lockring was a
> >BB
> >lockring. I'm not in need of another one, and
> dammed if I can find a
> >lockring that thread in my collection. Then I
> recently ended up with a
> >Sunshine hub, looks just the same as a Campagnolo,
> without a lockring, so
> >this time I measured the thing, well now I see a
> probelm, its 33mm in
> >diameter, what BB uses that size?, I've checked
> archives with no luck, just
> >looking for a cheaper version than the Campagnolo
> lockring for my
> >fixie.......regards wayne davidson Invercargill
> NZ...........
> >
> >_______________________________________________
> >Classicrendezvous mailing list
> >Classicrendezvous@bikelist.org
>
>http://www.bikelist.org/mailman/listinfo/classicrendezvous
> >
> >--
> >I am using the free version of SPAMfighter for
> private users.
> >It has removed 3890 spam emails to date.
> >Paying users do not have this message in their
> emails.
> >Get the free SPAMfighter here:
> http://www.spamfighter.com/len
> >
> >
> >
> >_______________________________________________
> >Classicrendezvous mailing list
> >Classicrendezvous@bikelist.org
>
>http://www.bikelist.org/mailman/listinfo/classicrendezvous
>
> _________________________________________________________________
> A place for moms to take a break!
> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>

_______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous