Re: [CR] Nervar Crank Questions


Example: Framebuilding:Restoration

Date: Sun, 24 Feb 2008 18:59:38 -0600
To: classicrendezvous@bikelist.org
From: Mark Stonich <mark@bikesmithdesign.com>
Subject: Re: [CR] Nervar Crank Questions
In-Reply-To: <022420081929.846.47C1C5920000C3B10000034E2215593414CE0D909F09@comcast.net>
References: <022420081929.846.47C1C5920000C3B10000034E2215593414CE0D909F09@comcast.net>


At 2/24/2008 07:29 PM +0000, gpvb1@comcast.net wrote:
>Mark:
>
>Are you sure that 1970s spindle was ISO? ISO spindles didn't even
>exist back then, did they?

I should have said it was Campi compatible. I've been working on the assumption that "ISO" was what they started calling "Campi compatible" after 1993.
>If you were running that GS crankset on an ISO spindle, that would
>be an incorrect combination. Campy didn't switch from JIS to ISO until 1993.

I was not aware Campi ever used a JIS spindle. But my newest Campi spindles and cranks are 1977.

Mark Stonich;
     BikeSmith Design & Fabrication
       5349 Elliot Ave S. - Minneapolis. MN 55417
            Ph. (612) 824-2372 http://bikesmithdesign.com
                        http://mnhpva.org