[CR]BB spindle width for Stronglight 93 set up up for single ring

(Example: Framebuilders:Alex Singer)

From: "Adam Hammond" <anhammond@gmail.com>
To: classic rendezvous <classicrendezvous@bikelist.org>
Date: Fri, 4 Jul 2008 11:31:29 -0400
Subject: [CR]BB spindle width for Stronglight 93 set up up for single ring

... does anyone know what work work best? I'm matching this to a Phil Wood track hub, so 42mm chainline on the "outer" ring position is what I'd like. The original Stronglight bottom bracket that came with the crankset, is asymmetrical, 127mm-wide, and spaced for two rings and a "bashguard." Further: with a JIS taper fit the bill?

If you've read this far and are looking either for an English-threaded asymmetrical 127mm Stronglight bottom bracket, a 52 tooth chainring or a "bashguard" for a Stronglight 93 crankset -- all in good shape -- let me know.

Adam Hammond
Toronto, ON, Canada