It was interesting to see another PR-10. I have had mine for about 25 years
. It was not as pristine as the one in the previous digest so I paintede it
in the early 80's I used '77 Volkswagen Mars Red to match my Chopper. The
paint is still fairly shiny but show the age with chips and scrapes of use.
I am sadly selling it at this time. I have finally admitted I am not going
to grow any more at age 59. The bike at 59cm is 3cm above my preferred siz
e. I long ago replaced the carbon fork with a Cinelli style Tnage fork. I a
m looking for the original fork. I may have given it away in a rare moment
of not saving everything. the carbon steel fork is easily replaced with a U
O-8 carbon steel fork if an accurate PR-10 is desired. A better alternative
is to find a Reynolds fork. Add a Reynolds fork and voila; you have a PX-1
0 without partial chrome stays. I wish I did not have to sell, but another
project beckons.Currently on E-Bay under article number;
250271196930Reserve is $150, subtract $10 w/o fork and subtract $25 if you
are a CR list member replying to this posting and buy direct. For the sm
aller rider I also have a Mercier w/o fork in a 21" size for $50If you need
an orphan drive side Campy Record arm in 170($20 a bit used looking)or 175
($25 better looking) I also have some other drive side orphans; Nervar,Sugi
no mighty, Gipiemme.I also have 2 close but no cigar SR cranksets. The 170
drives interchanges with Stronglight 99(86BCD)and the off-side arms are 171
. Who looks at both sides at the same side anyway. I also can't seem to tel
l the difference between 170 and 171 when I ride. I have some more parts th
at may need homes I am making the archaelogical dig soon. I even found a "n
ew" pair of 27" Specialized" aggressive off-road style tires. Thank you,
John Strizek in Sacramento California USA