[CR]Fwd: LOTS of Components and Small Parts FOR SALE (long list)

(Example: Production Builders:Frejus)

Date: Tue, 28 Oct 2008 10:09:56 -0500
From: "Wayne Bingham" <blkmktbks@gmail.com>
To: "classicrendezvous List" <Classicrendezvous@bikelist.org>
In-Reply-To: <73706f460810251422y23c1342cyef169a9a19811105@mail.gmail.com>
References: <73706f460810251422y23c1342cyef169a9a19811105@mail.gmail.com>
Subject: [CR]Fwd: LOTS of Components and Small Parts FOR SALE (long list)

Thanks to everyone for the interest (and the purchases, of course). The following items from the complete list below are spoken for:

Bador Competition Bottom Bracket EDCO Competition headsets (both) EDCO Elite Headset All the TA bottle cage tops All the CLB touring levers ATAX stem Suntour R/C brakes

Some of the JPR cork brake pads and the Weinmann fenders are taken, but some still remain. I may be able to get some additional CLB levers and ATAX stems, but that's uncertain at the moment. If so, I'll let everyone know.

Thank -

Wayne Bingham Lovettsville VA USA

-------------------

Items are grouped together with a link to a Wool Jersey folder for that group.

Bottom Brackets http://www.wooljersey.com/gallery/Wayne-Bingham/BMB-SALE/MiscParts/Bottombrackets/

---Stronglight Italian threaded, titanium axle 118 BB. Complete NOS/NIP. Very hard to find. $120 ---Galli Needle Bearing, Italian threaded 114 BB. Complete NOS/NIB. Very rare. $85 ---Unknown high-end bottom bracket assembly from the "hot rod" parts days targeted at Campagnolo, Galli, etc. This may have been a prototype made by FT Bologna. It's practically identical to the FT Bologna BB of the era, but has no markings on the cups or spindle. Italian threading. Double adjustable alloy cups with steel lock-rings. Sealed bearings on steel 114mm spindle. New, never mounted and very nice. No packaging. $75 ---Bador Competition Bottom Bracket. French made, almost identical to the Edco Competition BB of the same era. BSC threading. Double threaded alloy cups with alloy lock-rings. Sealed bearings in alloy body. Steel 115mm spindle. Used, take-off, in excellent condition. $50

Headsets http://www.wooljersey.com/gallery/Wayne-Bingham/BMB-SALE/MiscParts/Headsets/

---JPR Headset. Very rare French threaded oversized (1 1/8") headset for tandem forks. Silver anodized. Complete NOS/NIB, including top nut wrench and instruction sheet (in French, of course). $60 ---JPR Headset. Very rare French threaded standard sized headset. Silver or black anodized. Complete NOS/NIB, including top nut wrench and instruction sheet (in French, of course). $60 ea. - one of each color available. ---EDCO Competition headsets. English threaded. Silver or black anodized. This is the later (last) version of the Competition HS. These are some of the nicest cup and cone headsets ever made. Complete NOS/NIB. $75 ea. - one of each color available. ---EDCO Elite Headset. Swiss made chrome steel headset. English threading. Nice quality, classic looking headset. NOS/NIB. $25

Crankset http://www.wooljersey.com/gallery/Wayne-Bingham/BMB-SALE/MiscParts/Cranksets/

---First generation Dura Ace crankset, with original chain-guard ring. 170mm. 52/42 rings. NOS/New, but drive-side shows evidence of being mounted, maybe for display. No marks on rings and no similar evidence on non-drive-side arm. No packaging. $150

Brakeset http://www.wooljersey.com/gallery/Wayne-Bingham/BMB-SALE/MiscParts/Colnago-Brakes/

---Modolo Brakeset made for Colnago. New, never mounted. Caliper arms read "Colnago Ernesto", and levers have the Colnago club above the word "Colnago". The original installed Modolo hoods are soft and supple, but have slight color variations. They are perfectly usable and suitable for most applications. However, a perfect new pair of hoods is also included just in case these are destined for a show bike. The caliper bolts are threaded and nutted for non-recessed mounting, but included are recessed mount nuts so that the bolts can be cut down for that application if desired. This brakeset is rare enough, but almost impossible to find as new-old-stock. $325

Odds & Ends http://www.wooljersey.com/gallery/Wayne-Bingham/BMB-SALE/MiscParts/Odds-Ends/

---TA stem mounted cable guide. NOS/NIP in original plastic sleeve. Very rare. 4 available. $18 ea. ---TA bottle cage replacement top. NOS, no packaging. Original white plastic, with no yellowing, fading or cracking. 5 available. $12 ea. ---Cinelli 1R stem replacement parts kit. Includes everything but the stem body. 8 pieces: Alloy quill bolt, expander and brass washer; wedge bolt, wedge and brass washer; bar engagement plate; plastic stem face insert. 5 kits available. $28 kit. ---ALGI drop-out adjusters. Long or short. Very similar to Campagnolo. Nice replacements for anything but a concours show bike. New. Multiple pairs in each size available. $10 pr. ---AGPA chrome steel cable clips, with separate nuts and bolts. Nice quality replacement clips for standard 1" top tubes. Factory packaged in sets of 3. 10 sets available. $8 set. ---Stronglight A9 replacement needle bearing set. NIP. $25 ---Really cool and funky French made cork brake pads, set of 4 in original plastic cylindrical box. Not really sure yet what these were designed to fit, but can probably be trimmed to fit a number of holders. Don't really know how they work either. Interesting as just a cool display item if nothing else. NOS/NIP. 15 sets available. $5 set. ---Weinmann chrome steel "Shortie" fenders. NOS in brown paper wrapping. 45 mm width. 4 pair available. $20 pr. ---Bluemels Olympic "Shortie" plactic fenders with alloy mounting tab. NOS in plastic sleeves. Satin silver finish. 40 or 45 mm width. 1 pair in each width available. $25 pr. ---CLB alloy touring brake levers - Type 1. NOS, no packaging with very slight shop wear. Two-piece clamp mount allows for mounting on a wide variety of bar diameters. Very hard to find. $30 ---CLB touring brake lever pair - Type 2w. White coated alloy lever with black resin body. Steel 22.4 mm band-mount. NOS, no packaging. Designed for use on flat or riser bars, lever blades have a downward arc. I have a single one mounted on riser "city" bars for a front brake on one of my fixed-gear bikes. $25 ---CLB touring brake lever pair - Type 2s. Silver alloy lever with black resin body. Steel 23.6 mm band-mount. Designed for use on flat or riser bars. Right and left lever blades have a downward arc. NOS, no packaging. $25 ---Weinmann 165 alloy brake levers with adjusters. NOS, new in sealed plastic package. $20 ---Simplex S001 rear derailleur. NOS, no packaging. Several available. $30 ---Ideale Randonneuse #2004 black suede saddle (w/clamp). NOS, in original Ideale printed plastic sleeve. $85 ---Maxi-car tandem drum brake alloy hub. 36 hole, 140 mm spaced axle. NOS, no packaging. Very rare! $225 (or best offer) ---SunTour Roller-Cam brake set (two pair). Includes two pair of caliper arms, cable yokes and mounting bolts. NOS, in plastic sleeves. I have not tried to set-up a pair of these on a frame with conventional cantilever bosses. I've heard mixed reports as to if that works or not. Anyone know for sure? $60 set ---ATAX stem with integrated shifter bosses. 22.2 mm quill diameter, 75 mm extension. French made. NOS in ATAX plastic sleeve. Something unusual here. I can't remember ever seeing one of these before, except that this type shifter detail started showing up on custom stems for some city bikes at NAHBS in recent years. Mate this with a pair of the touring brake levers I have available and some riser/city bars for a pretty cool look. $15

--------------