Stewart Ferrell wrote:
> I use a dremel with a large buffing wheel and rouge on tough spots first,
> them move to happich or brasso with the wheel. Then I use happich with a
> cotton cloth and hand rub until I reach the desired finish. I remove any film with
> AFTA cleaner regreaser. It works better than water based cleaners and leaves
> no spots.
I use a double sided bench grinder with one of the stones replaced with a large, soft buffing wheel. A little bit of Simichrome and a couple minutes on the buffing wheel is all it takes...
--
-John Thompson (john@os2.dhs.org)
Appleton WI USA