Hi Jerry,
Cool bike! Now I know why you were looking for those Shimano high flange hubs ;-)
I converted a 21inch version of that same bike - in orange, too!
I seem to recall trying a pair of Shimano Tourney centerpull brakes on my machine, and finding that they didn't have the necessary reach to contact the 650B rim. So I installed an unusual BMX roller cam brake from Odyssey called the Pitbull II. Now, seeing yours, I'm tempted to go back and try some Dia-Compe centerpull calipers just to see if those will reach...hmmm...
I think that the handling of my bike on 650B is much improved over the original 27 inch wheel format. These bikes have low-trail front ends and high bottom brackets. So a wider yet smaller diameter tire run at low pressure reduces the bottom bracket height, and creates enough pneumatic trail to bring this frameset into the sweetspot. The 650B converted World Voyager would probably be a good 650B converted bike on which to use a front bar bag.
I've done quite a few 650B conversions on older On-Topic sport touring bikes. With a careful selection of components, it's possible to retain the classic look and presentation, and yet create a machine that has more utility owing to the fat tires, fenders, and superior comfort provided by the 650x38B tires. The nice part about this is that there are no permanent modifications required to the bike, so it's quick and easy to return the machine back to its original/stock condition.
Enjoy your new 650B machine, and welcome to the "650B club".
Ed Braley
Falmouth, Maine
USA
> Just returned from this morning's shakedown cruise of the Schwinn World
Voyageur 650B conversion, and took a few photos:
>
> http://flickr.com/
>
> I had mentioned this bike here a couple of times previously. I had long
been looking for a clean original one, preferably in orange. The nostalgia
factor is that Arnie Nashbar, who was still selling bike parts out of his
gargage at the time, got several of these, in orange, for my fellow members
of the OutSpokin' Wheelmen (LAW) of Youngstown, OH in the early 70's.
>
> Bought one between Thanksgiving and Christmas. It was a nominal 23" but
I hoped that actual size and BB height might be such that standover height
would be manageable. When it arrived, it was very clean, but standover was
very close to 33", whereas 32" is about all I can handle comfortably. What
to do? Discussed trading it for a 21", but as it was very clean and
original and the orange I remembered from In The Day, I decided to keep it,
but convert to 650B wheels, which reduces the standover 0.9" versus the
original 27" wheels.
>
> As I had never built 650B wheels before, this was a bit of a learning
experience, and as usual, I had help from lots of CR folks. I preserved the
original 27" wheels (except I've borrowed the original skewers for the
650B's), and obtained a pair of correct hubs (Shimano large flange, just
below DA) from Doug Smith in UK. Got out the Sutherlands spoke charts and
ordered a range of spoke sizes to cover those most common for 650B wheels.
Got a pair of the Rivendell-designed Panaracer "Nifty Swifty" 650B x 33
tires and a pair of modern Weinmann 650B rims ( as well a a pair of
Velocity) from Harris Cyclery. Built the wheels using the Weinmanns as at
least the marque existed when the bike was built. Anyone know if the
current Weinmann rims are still built by the same Swiss/Belgian/German
company as In The Day?
>
> I had worried if I would be able to find a classic brake with enough
reach to handle the 650B wheels. The ones in the photos are DiaCompe CP's,
which seem to be the modern version of the same DiaCompe model original to
the bike. I got them from Rocky Mountain Cyclery. They advertise these as
being the same as the DiaCompe "760" that Rivendell sells. However, in
response to my question, the seller measured these at 82 mm max reach, which
turned out to be pretty accurate. Rivendell said theirs were 76 mm, or maybe
78 mm at most. I don't know if Rivendell mismeasured, or if the ones I
bought are actually longer, but I'd recommend these to anyone looking for an
extra long reach classic brakeset.
>
> Except for the wheels, which do have correct hubs and original skewers,
everything is original except the aforementioned brakes, the cables and
brake housing (stainless housings for SunTour barends are original) the
water bottle, the pedals and the toe clips and straps. The original pedals
were rather cludgy KKT's with a lip that hung down to hold reflectors. The
lips didn't help the reduced ground clearance and had already been bent even
with 27" wheels. Replaced with MKS Sylvan track with stainless Japanese L
(European M) Minoura clips replacing the original Janpanese LL (European L)
clips.
>
> Also, I removed to original brake suicide levers. This leaves the
Diacompe lever extra length pivot pins protruding. A couple of different CR
members generously supplied regular length pivot pins cheap or free, so I
have replaced the pins plus have spares for future projects. Also, removing
the suicide levers and replacing the pins allows adding brake hoods, which
the bike did not originally have. These I got from CR member Dave Abraham.
>
> Overall, I'm quite happy with the outcome. Others might consider this
approach for adapting that great bike that is just a couple of cm too tall.
I think the 0.9" reduction in height going from 27" to 650B is just enough
to be useful, while still not resulting in a dangerously low ground
clearance. Wouldn't recommend this for a criterium frame with 180mm cranks,
but for a sports/touring bike with 170 mm cranks, it seems to work just
fine.
>
> Regards,
>
> Jerry Moos
> Big Spring, Texas