Re: [CR]Which Washers on Campy Super record calipers? Help !

(Example: Framebuilders:Masi)

Date: Sat, 16 Feb 2008 15:30:17 -0500
From: "Steven Willis" <smwillis@verizon.net>
Subject: Re: [CR]Which Washers on Campy Super record calipers? Help !
To: "Mark Cutrufelli" <rena.cutrufelli@comcast.net>, <classicrendezvous@bikelist.org>
References: <c54.285d743f.34e880e5@aol.com> <002401c870d7$74415f60$0d0a0a0a@PC175064711631>
reply-type=original

The way I remember it is,
   a silver steel first against the spring, then an arm,
   then the brass one,
   then the other arm,
   then the silver steel with the notches on the other most edge, then the 13 mm lock nut, then the 10 mm dome nut. Steven Willis The Bike Stand 1778 East Second Street Scotch Plains NJ 07076 908-322-3330 http://www.thebikestand.com

----- Original Message -----
From: Mark Cutrufelli
To: classicrendezvous@bikelist.org
Sent: Saturday, February 16, 2008 3:06 PM
Subject: [CR]Which Washers on Campy Super record calipers? Help !

>
> I dissassembled my brake calipers totally to clean and polish thinking if
> I
> left one assembled I'd be fine. Nope. Are there One or two washers next to
> the spring? I think there may be the thin one and the one slightly
> serrated
> on one side only that are face to face. If so is the thicKer serrated
> washer
> the one closer to the spring and which way does the rough or serrated edge
> face? The Campy Site doesn't show the 1983 SR calipers
>
> Thank You
>
> Mark Eli Cutrufelli
> Laurel,MD 20723
> USA