Hullo,
I suspect for your needs a cylinder hone would work fine. These are
used for honing the bore of brake cylinders, and you can find them at
automotive parts houses.
For reamers made to 27.2mm check with Ceeway.com, in England or
Bringheli.com in Cleveland Ohio, USA Expect to pay 150-200USD for one.
Cheers!
James Valiensi, Northridge, CA USA
http://www.valiensi.com
On Apr 27, 2008, at 6:29 AM, Anthony Kinder wrote:
> Hi all,
> Am looking for a fixed size reamer to clean out seat tubes. Generally
> all work is on Colnago frames so needs to be 27.2mm. (I make 1.07087")
> I don't know if that is the exact size of the reamer or if it is a
> smidge larger.
> I had enough of standing over a frame and putting most of my 200lb
> mass
> onto a seatpost only to end up with a ghastly zig-zig down the pole
> even
> with suitable lube.
> Help, advice and tools for sale greatly appreciated as always.
> Anthony Kinder
> Perth, Western Australia