Re: [CR]fastback stays .... how to?

(Example: Component Manufacturers:Cinelli)

From: <joeb-z@comcast.net>
To: Dale Brown <oroboyz@aol.com>, kamenjas@gmail.com, classicrendezvous@bikelist.org
Subject: Re: [CR]fastback stays .... how to?
Date: Sat, 31 May 2008 01:43:06 +0000

I swear, Dale and I do not coordinate where he talks about "nuanced variations" and I point out my take on nuanced on his website.

For "nuanced" types from Hetchins see:

http://www.classicrendezvous.com/British_isles/Hetchins/Hetch70s+.htm

Especially my ex-blue bike at the bottom. I'm a fool ...... Note the interplay of the "shot-in" lug form with the seatstay lug.

Joe Bender-Zanoni Whitneyville, CT

-------------- Original message ---------------------- From: Dale Brown <oroboyz@aol.com>
>
> << ....wondering how they're made assembled? And if there is plus or minus to
> doing such an arrangement other than aesthetics? Any special lugs
> needed or can such be fashioned to any seat lug with an adiitional
> sleeve or widget? >>
>
> Nothing that difficult...
>
> In this case they are using a small diameter seat stay (1/2" or 12 mm?) so there
> is room to miter the seat stay tops to the underside of the seat post binder.
>
> You see other builders (Cinelli, etc.) accomplish this approximate look with a
> plug in cap, that is made/formed cast, to allow everything to squeeze in the
> space available. There are many nuanced variations on this theme....
>
>
>
>
>
>
>
>
> Dale Brown
> cycles de ORO Bike Shop
> 1410 Mill Street
> Greensboro, North Carolina 27408 USA
> 336-274-5959
> http://cyclesdeoro.com
> http://www.classicrendezvous.com
> http://www.carolinacup.com
> http://www.greensborovelo.com
> http://www.bikegso.org
> http://nbda.com
>
>
>
>
>
>
> -----Original Message-----
> From: Ben Kamenjas <kamenjas@gmail.com>
> To: classicrendezvous@bikelist.org
> Sent: Fri, 30 May 2008 5:20 pm
> Subject: [CR]fastback stays .... how to?
>
>
>
>
>
>
>
>
>
> Coolio's,?
> ?
>
> I was wondering about the fastback stays (is that what they're called?)
> on this raleigh pro being sold downunder. More specifically ...
> wondering how they're made assembled? And if there is plus or minus to
> doing such an arrangement other than aesthetics? Any special lugs
> needed or can such be fashioned to any seat lug with an adiitional
> sleeve or widget??
> ?
>
> you'll see what i' asking for in the last pic of the below ebay auction
> >>?
> ?
>
> http://ebay.com/<blah>
> ?
>
> or item # 220238599516 ?
>
> Something about the way the seat stays join really appeals to my eye's
> ... I know cinelli's had a similar fitting but with a wider bolt??
> ?
>
> thanks, ciao?
> ?
>
> Ben Kamenjas?
>
> Kensingon, NSW?
>
> Australia?
> ?
>
> _______________________________________________?
>
> Classicrendezvous mailing list?
>
> Classicrendezvous@bikelist.org?
>
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>
>
>
>
>
>
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous

_______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous