Re: [CR]What diameter seatpin for Eisentraut A Model?
(Example: Framebuilding:Tubing)
From: "
Ken Wehrenberg" <
wnwires@htc.net>
Subject: Re: [CR]What diameter seatpin for Eisentraut A Model?
Date: Wed, 2 Jul 2008 07:06:29 -0500
To: classicrendezvous@bikelist.org
cc: billkloos@landuseoregon.com
Bill:
Mine, recently refinished by Ed Litton, takes a 27.2mm, but if a
different tubing was used, and these were customs, yours may
conceivably vary.
Ken Wehrenberg, Hermann, MO USA