David,
I like to do more, usually at least four coats. However, I sand after the first two or three (depending on how much the tape soaks up,) so one coat gets removed. If it's really rough, I will sand a second time.
Let the shellac dry completely, then lightly "shoe-shine" the tape with 1.5" strips of 400 grit paper. Mask the bar next to the stem so you don't scratch the aluminum, and be careful not to cut into the tape itself too much.
Doing this smooths the shellac, particularly at the overlaps, while leaving enough texture for a secure grip. Overall, it makes for a nicer finish.
This is all much easier to do with the bar and stem off the bike. I clamp the stem into a workstand so it can pivot in any direction, even upside down.
Greg Reiche CyclArt Vista, CA USA
-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org]On Behalf Of David Bean Sent: Wednesday, July 23, 2008 5:46 AM To: CR List (E-mail) Subject: [CR]Shellacking handlebar tape
What kind of shellac should one use for this? (Old-fashioned clear real shellac?) How many coats should be used?
Thanks
David Bean Arlington, MA USA beandk at are-see-enn dot com
_______________________________________________
--
I am using the free version of SPAMfighter for private users.
It has removed 6920 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/
--
I am using the free version of SPAMfighter for private users.
It has removed 6920 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/