[CR] Harden cartridge bearing size?

(Example: Framebuilders:Masi)

From: "Ben Kamenjas" <kamenjas@gmail.com>
To: <classicrendezvous@bikelist.org>
In-Reply-To: <MONKEYFOODFRaqbC8wS0000007f@monkeyfood.nt.phred.org>
Subject: [CR] Harden cartridge bearing size?
Date: Wed, 7 Jan 2009 02:16:41 +1100
References:


Thanks Peter,

An excellent source of detail !!!

I also found lots more info and analysis on the following link. Valuable info on Baylis Wiley "cassette" and Wright oil bath hubs too.

http://pardo.net/bike/pic/fail-024/000.html#harden

Fascinating reading, perhaps the most detail I have ever read regarding any hubs :)

For the CR archives the bearings are known as KLNJ 3/8 Y.

Did-You-Know .... The only Harden hubs exported were 500 cartridge large flange, in 1947 to Australia to Bruce Small & Co (AKA Malvern Star owner and overlord).

ciao,

Ben Kamenjas Kensington, Australia


> Peter Underwood's article at
> http://www.classiclightweights.co.uk/harden-servicing.html should
> give you
> all the information you need. A good bearing stockist will have
> charts of
> equivalents for whatever range they stock.
>
>
>
> Peter Brown, Lincolnshire, England