[CR] 650b Tire/Rim Fit "Issues"

(Example: Production Builders)

Date: Fri, 1 May 2009 15:24:11 -0700
From: "sandranian" <sandranian@yahoo.com>
To: Rendezvous Classic <classicrendezvous@bikelist.org>
Subject: [CR] 650b Tire/Rim Fit "Issues"


I just purchased a c1960 Gitane with 650b wheels/rims. I replaced the tires, purchasing (from Harris Cyclery) a pair of new Panaracer 650b tires. However, they don't seem to set right in the rims, specially the rear (I don't think the front rim is a problem). The rear rim is a steel Rigida 650b rim (at least that's what's stamped into it). The problem is that the bead of the tire doesn't seem to want to fit all the way around: It almost appears a bit small for the wheel. What is the problem here? What is the fix? Can I "stretch" the bead at all?

It all appears to be right, but just doesn't fit that way, even when inflated, it creates a "bump" (low) in the tire, but the rim is true (no hops).

Stephan Andranian Costa Mesa, California USA http://www.GitaneUSA.com

_____________________________________

This E-mail is covered by the Electronic Communications Privacy Act, 18 U.S.C. ยงยง 2510-2521 and is legally privileged. This information is confidential information and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.