[CR] EDCO Eccentric BB

(Example: Framebuilders:Mario Confente)

Date: Wed, 30 Sep 2009 13:19:43 -0400
From: "Wayne Bingham" <blkmktbks@gmail.com>
To: Classic Rendezvous <Classicrendezvous@bikelist.org>
Subject: [CR] EDCO Eccentric BB


There were a few inquires for info and pix of the EDCO eccentric BBs, which can be found here:

http://www.wooljersey.com/gallery/Wayne-Bingham/VeloClassique/

I've included a pic sent to me by Bob Johnson that looks like an eccentric BB installed in a frame. RE Bob's question about removal, both cups must be turned toward the rear of the frame using a 26mm wrench (assuming that the BB was installed correctly, of course). The BBs use spindles offset to the drive side, so proper orientation is pretty obvious.

--
Wayne Bingham
Velo Classique/MPI
Purcellville, Virginia USA