Hi everyone,
Offered to CR members are three very different but excellent frames, a variety of parts including some lovely wheels and some more books...
I can take payment a number of ways - Paypal or cheque in GBP, cash sent registered post, Traveller\u2019s cheques in $, direct bank transfer within the UK or European Iban bank transfer. I will always combine shipping in order to reduce costs.
Frames and wheel pairs cost 80 GBP to ship to the USA, 100 GBP to ship to Australia/New Zealand and 11 GBP within the UK.
With the pound being still quite low in value these are a real bargain... for US and European buyers.
Hilary Stone, Bristol, British Isles
BILL HANNINGTON AUDAX/RANDONNEUR FRAME c1980
Seat Tube (ctt): 20in
Top Tube (ctc): 20.5in
Rear dropout width: 122mm
Wheel size: 700C
Frame tubing: Vitus 980
Brake drop with 700C/Sprint wheel: 53mm
Bill Hannington was a small framebuilder baseed near Reading in
Berkshire. This extremely nice little frame is in excellent condition
with excellent paint (just a very small number of tiny marks) features
Thanet like Hellenic seatstays except that that they are not connected
to the seat tube - on a small frame such as this it gives a lot more
room for a saddlebag as a well as a distinctive appearance.
135GBP
http://i141.photobucket.com/
ROTRAX SUPERCOURSE FRAME 1953
Seat Tube (ctt): 21in
Top Tube (ctc): 22in
Rear dropout width: 115mm
Wheel size: 27in/700C
Frame tubing: Reynolds 531 DB
Brake drop with 700C/Sprint wheel: 58mm
This is a very beautiful Rotrax frame which is thought to be the
Supercourse model - the normal long points on the head lugs would not
not be possible on a small frame such as this. In every other respect it
has all the Supercourse details - the wonderful reinforced pump pegs,
the most elegant rear brake bridge ever etc - and it has the remains of
its elaborate original finish featuring both white and yellow box
lining! It does however I think need refinishing... The frame is in
vetry sound condition, the seatstays have a few small dents from a
saddlebag support but nothing which cannot be easily filled. A wonderful
frame.
165GBP
http://i141.photobucket.com/
JAN DE REUS ROAD FRAME c1994 with shaped tubing Seat Tube (ctc): 57cm Top Tube (ctc): 56cm Rear dropout width: 130mm Wheel size: 700C Brake drop with 700C/Sprint wheel: 45mm This is a rather beautiful KOF Dutch frame built with fluted shaped tubing very similar to the Gilco tubing used by Colnagos - I suspect it might be Dedaccaicai. The frame is in very sound condition (just a small dent to chainstay caused by chainsuck) and the paint is really quite good though the photos flatter its conditiion a little - there are quite a number of small marks - these I think could be carefully touched up. Overall it is a great frame. 195GBP
http://i141.photobucket.com/
AIRLITE LARGE FLANGE CONTINENTAL SINGLE FIXED 32/40H on FIAMME SPRINT
RIMS (for tubular tyres) Excellent very beautiful wheels, the chrome is
superb on both hubs and the rims are almost unworn, the best I have seen
for a long time stainless 14/16g spokes 110mm rear OLD Excellent very
useable tubs 120 GBP
http://i141.photobucket.com/
MILREMO SPECIAL COURSE 5-pin CHAINSET 170mm with 49T TA 3/32in chainring
in very good order one or two small rubs to cranks but overall very
good/excellent cranks are 1950s Milremo style £24
http://i141.photobucket.com/
THETIC OVAL CHAINRING c1938 46T 1/8in steel only light wear these rings
can be used in fixed or with hub gear - there is no slack chain. Unusual
and a talking piece to fit 5-pin cranks £25
http://i141.photobucket.com/
AIRLITE LARGE FLANGE double fixed with virtually perfect chrome 40H
laced with stainless DB spokes to Mavic MA2 rim £55
http://i141.photobucket.com/
DAWES CONCORDE BARS Rare & beautiful, excellent. From the 1950s. It is
not very well known that in the 1950s Dawes manufactured a wide range of
handlebars and brakes for aftermarket fitment. They were really a quite
popular choice in England until the early 1960s. The Concorde shape was
very similar to the Strata South of France bars bending away quickly
from the centre and with not very much forward reach and inspired by the
bars used by Rene Vietto, the French Tour de France star. They were
attractively engraved each side of the stem centre bulge. These are in
excellent condition and the standard 15in width with a 25.4mm clamp
diameter. The engraved sections are almost unmarked. These bars look
absolutely fabulous with only about a 1/4 of the tops covered in tape -
it accentuates the curves and the gorgeous engraving. 40 GBP
http://i141.photobucket.com/
1950s GAS BOTTLE INFLATOR rare period accessory £20
http://i141.photobucket.com/
LYOTARD MB23 MARCEL BERTHET PEDALS good/very good condition £15
http://i141.photobucket.com/
MAILLARD ALUMINIUM FREEWHEEL PARTS one SH body lots of NOS sprockets but
will not make a complete freewheel £19
http://i141.photobucket.com/
GB BARS AND STEM 1960s/70s 9cm stem, 40cm wide shallow bars £12
http://i141.photobucket.com/
RAULER PANTO\u2019D 3TTT STEM 11cm very good condition with a few small marks £30
http://i141.photobucket.com/
CINELLI STEEL 8cm TRACK STEM been rechromed £35
http://i141.photobucket.com/
FABULOUS FIFTIES by Noel Henderson round up on 1950s road racing Bobet,
Coppi, Kubler Koblet etc 39pages a good read £6
http://i141.photobucket.com/
FAUSTO COPPI by Salvatore Trence a not common biography of Coppi 63
pages £12
http://i141.photobucket.com/
1984 FREEWHEEL CATALOGUE fantastic British mail order catalogue
featuring many parts and accessories including ICS CAmpag, Mercian and
Follis great resource £8
http://i141.photobucket.com/
RON KITCHING CATALOGUE 1971 Offered for sale is an original slightly tatty 1971 Ron Kitching catalogue which has been ring bound - this is a fascinating catalogue with details of all the parts and accessories Ron Kitching imported - Cinelli, TA, Lyotard, Zeus, Titan, Jos, Ideale etc. 15 GBP
THE INGENIOUS MR PEDERSEN Dursley Pedersen history Offered for sale is an excellent copy of the Ingenious Mr Pedersen by David Evans. This book is the standard reference work on Dursley Pedersen bikes and is now much in demand and quite rare. It is 144 pages long. 20 GBP
MOULTON BICYCLE Tony Hadland Offered for sale is an excellent copy of the Moulton Bicycle by Tony Hadland published in 1981 which tells the story of the F frame Moultons. 156 pages. Paperback. Really rather rare. 25 GBP
RALEIGH JUBILEE CATALOGUE 1937 Gorgeous Offered for sale is a really beautiful Jubilee Raleigh catalogue from 1937. It is in very good condition and covers the complete range from the top notch RRA through to all the roadsters and including the very rare tandem. Much of the printing is in gold. It is sized 11in x 8in and has 40pp. 35 GBP
CYCLING HEROES Post Simpson van Looy Coppi Bahamontes Offered for sale is an excellent copy of Cycling Heroes by Les Woodland and published in 1994. This book contains 19 fascinating portraits of racing cyclists of the last thirty to fifty years - Peterr Post, Tom Simpson, Brian Robinson, Win Van Est, Rik Van Looy, Jacques Anquetil, Graham Webb, Barry Hoban, Rik Van Steenbergen, Fausto Coppi, Jan Janssen, Beryl Burton, Fedrico Bahamontes, Raymond Poulidor, Shay Elliott, Louison Bobet, Charly Gaul, Joop Zoetemelk and Jan Derksen. 142 pages, hardback. 12 GBP