[CR] Was: repair question. Now: "Stud gun"?

(Example: Racing)

References: <8CC20B117754B32-6A64-CB4E@webmail-d010.sysops.aol.com> <417638.53177.qm@web111002.mail.gq1.yahoo.com>
To: <classicrendezvous@bikelist.org>
Date: Thu, 22 Oct 2009 10:33:12 -0400
In-Reply-To: <417638.53177.qm@web111002.mail.gq1.yahoo.com>
From: <oroboyz@aol.com>
Subject: [CR] Was: repair question. Now: "Stud gun"?


John wrot4e: << ...give the guy 30 bucks to use a stud gun and properly pull the dent out. Emphasize to him to hold the tube steady around the dent because you don't want a bow in your tube. The stud gun is wonder. >>

John:

Tell us about this tool. It's a new one to me...

TIA

Dale Brown Greensboro, North Carolina USA

-----Original Message----- From: John D Proch <johnprochss@yahoo.com> To: jguerry@aol.com; classicrendezvous@bikelist.org Sent: Thu, Oct 22, 2009 8:53 am Subject: Re: [CR] Frame repair question

No John,

I worked in auto body for 35+ years. Get the dented area clean of rust and paint. Find a friend or go to you local auto body shop and give the guy 30 bucks to use a stud gun and properly pull the dent out. Emphasize to him to hold the tube steady around the dent because you don't want a bow in your tube. The stud gun is wonderful. My opinion.

John Proch La Grange, Texas PS...good night to all.

________________________________ From: "jguerry@aol.com" <jguerry@aol.com> To: classicrendezvous@bikelist.org Sent: Wed, October 21, 2009 5:00:52 PM Subject: [CR] Frame repair question

Hello CR listers, I seem to have a knack for finding old Paramounts in poor condition. I bought a 73 P15 for 300 bucks and had Waterford repaint it for an additional 700 or so. I just recently found a 68 that is in pretty good shape but with a mish mash of incorrect components, and I have a 69 that I found at a garage sale for 10 bucks. The 69 is quite sad and had been left out in the weather for a long time. It is faded and every paint chip is rusted. It needs new chrome so rather than paying for chrome and new paint I am thinking of just having it entirely chromed. I recently had a 72 Cilo in similar shape chromed for a total cost of $300 and it turned out great.

My problem is the bike has one dent in the top tube. About an inch long and an eighth of an inch deep. I have a Burnz-o-matic Oxygen / Propane brazing torch that my Father had in his tools. I have never used it, but I am wondering if a proper repair for my dent would be to strip the area of paint and fill the dent with brass brazing material, and then file / sand smooth. If this sounds reasonable would anyone be able to give me some tips, such as how rough to scrub up the tube (file or coarse sandpaper?) and how hot to get the tube (should it glow orange before adding brass?)

John Guerry
Preparing for winter projects in
St. Louis, MO, US