Re: [CR] Raleigh Pro touchup paint

(Example: Framebuilders:Mario Confente)

Date: Sun, 13 Dec 2009 13:18:51 -0800
From: "verktyg" <verktyg@aol.com>
To: Anthony Taylor <ajft1942@yahoo.com>, <Classicrendezvous@bikelist.org>
References: <453479.18789.qm@web84107.mail.mud.yahoo.com>
In-Reply-To: <453479.18789.qm@web84107.mail.mud.yahoo.com>
Subject: Re: [CR] Raleigh Pro touchup paint


Many auto parts stores carry a selection of touch up paint in small containers with a brush in the cap.

Take the frame with you to get a good match (you might get some funny looks but hey...).

Use something like Isopropyl alcohol on a soft cloth to remove the smoke and any grease.

A few very light coats of touch up paint with adequate time to dry between coats will work well. After a week or so you can rub out the touched up spots with some rubbing compound or car polish.

Remember, you're doing camouflage not a concours d'elegance restoration. It wont be noticeable (or shouldn't be noticeable) from 5-10 feet (1.5-3 meters).

Does your Pro have the "bird's mouth" lugs? http://tinyurl.com/yefs8a6

Chas. Colerich Oakland, CA USA

Anthony Taylor wrote:
> All,
>
> I have just acquired a nice original '73 Raleigh Professional in blue/silver. My next job is a complete strip to repack bearings, and thoroughly clean everything. Interestingly, when I opened the box upon receipt there was a strong odor of smoke! Closer examination revealed a brownish film all over everything. Looks like from wood smoke?
>
> Paint is generally very good, but the top tube has some paint loss under the rear brake cable. Does anyone know of a commercially available touch-up paint that is a good match for this color blue? Also, there are rub marks on both sides of the head tube. Available touch-up paint?
>
> I would be grateful for any input.

>

> Thanks

>

> Tony Taylor

> Manchester NH