Re: [CR] Clement Evolution Tubulars- Tubulars?

(Example: Framebuilders:Dario Pegoretti)

In-Reply-To: <B4CF83C7-BC57-456B-AAFE-34A9A21CA508@gmail.com>
References:
Date: Wed, 11 Mar 2009 08:59:16 -0500
From: "Wayne Bingham" <blkmktbks@gmail.com>
To: <classicrendezvous@bikelist.org>
Subject: Re: [CR] Clement Evolution Tubulars- Tubulars?


The Clement Evolution was, indeed, a "tubular clincher" similar to Tufo's version. Having recently discovered in the MPI warehouse a display case of little sections of all of Clements tires from this time period, I've learned that there were three different versions of this type tire, Evolution, CF 2001 and Gypsy. They are all slightly different, and the CF 2001 has a PSI rating of 100. Interestingly, the Gypsy has no PSI rating indicated. I don't yet know if they had specific rim requirements or recommendations. One of the things I have not yet had the time to go through are all the original manufacturers catalogs and spec sheets that I've acquired, so more detailed information is probably available, I just have to dig for it.

I will have the Clement sample display, along with lots of other interesting vintage display and promotional material on display at the Cirque.

-- Wayne Bingham Lovettsville, Virginia USA


> Came across a set of Clement Evolution tires and trying to figure out what
> the deal is with them. They have a groove along the side like they would be
> used as clinchers, similar to the Tufo Tubular-Clinchers. Also, the bottom
> that would normally be "glued on" is rubber, so I'm guessing they are not
> true tubulars. Lastly, the max PSI is only 80, not very characteristic of
> tubulars.
>
> Does anyone have any experience with these? Please fill me in.

>

> Thanks.

>

> Sean Flores