> From: Jerome & Elizabeth Moos <jerrymoos@sbcglobal.net>
> Following up on my post Friday, looking for New Winner cogs, I went
> through the lot I just bought and also disassembled an NIP New Winner
> Ultra-6. Despite Sutherlands making it sound like more, it appears
> Winner/New Winner/Winner Pro had basically three types of cogs. The
> outer cog (or two-cog cluster for 7-speed) threaded on. The next
> three cogs,or two on a 5-speed, also threaded on, but with a slightly
> larger thread diameter. The two inner cogs slid on, with 4 tabs.
>
....<snip>....
> I'm willing to pay cash as well for 14T or 15T outers, 21 or 19
> middle or 22, 23, 24, or 25T middle if they exist, or 27, 28, 32 or
> 34 inner.
to Jerry and anyone else seeking to understand the mystery and wonder that is (are?) SunTour New Winner and Winner freewheels, I put some tech info on my Flickr page:
http://www.flickr.com/
The New Winner and Winner did sorta have three types of cogs, but the details are critical. It looks like there are actually 11 types of cogs. It looks like there are 7 types of spacers too. The Winner Pro is a different story, with mostly different cogs. The Winner Pro is much easier to deal with, but you don't have option of non-Ultra spacing. Not a big loss for most of us.
Jerry, if you can tell me the letter and tooth designation for the cogs you are seeking, I'll check my stock.
regards,
Steve Kurt
Peoria, IL