On May 12, 2009, at 11:54 AM, Ken Freeman wrote:
> To what Mark said I would add,
>
> You can also use the 13 mm nut on the front to hold the caliper in
> place
> while you tighten the nut in the back. I find that a little easier
> than
> moving the caliper after it's been tightened.
>
> Ken Freeman
> Ann Arbor, MI USA
>> . There are also the 13mm tool flats on
>> the side of the center bolt, which allows the use of a tool for
>> centering,
>> after the brake mounting nut has been tightened. Sometimes there is
>> no
>> room
>> to apply the tool because, the headset for example, gets in the way.
In 35 years of adjusting Campy brakes I've never seen a situation where a cone wrench couldn't be used on the bolt flats. Phil Brown Nice today in Oakland, Calif.