addendum to that last time i ordered round blades from nova who has their own made they informed me tange has quit making theirs not sure if there is anyone else still making them???? in this diameter anyways peace
sarahgibson
acmebicyclecompanydotcom
kansascitymissouri
>
well behaved women rarely make history _ride yr friggin bicycle_
> From: sadiejane9@hotmail.com
> To: hughwthornton@yahoo.co.uk; classicrendezvous@bikelist.org
> Date: Thu, 25 Jun 2009 13:46:11 +0000
> Subject: Re: [CR] Speaking of round fork blades
>
>
> tho "new"
> yet in the tradion of cr
> acme uses round blades quite often
> there's an elegance about them....
> http://www.acmebicyclecompany.com/
> peace
>
> sarahgibson
> acmebicyclecompanydotcom
> kansascitymissouri
>
>
>
> well behaved women rarely make history
> _ride yr friggin bicycle_
>
>
>
>
>
> > Date: Wed, 24 Jun 2009 21:07:12 +0000
> > From: hughwthornton@yahoo.co.uk
> > To: classicrendezvous@bikelist.org
> > Subject: Re: [CR] Speaking of round fork blades
> >
> > As most of the respondents note, round fork blades are commonly used on track bikes because they are laterall stiffer. They are potentially not as stiff in the vertical and fore-aft directions - this is not an issue on track bikes, but may account for a good ride on a road bike, as noted by one respondent. To add to the list of road bikes with round forks, I have a late 70s Gazelle Champion Mondiale with round blades, but I can't comment on any possible effect because I have not yet had it built up. Most Gazelles I have seen have had oval blades and I have't a clue whether this was standard or an option for my particular frame. Round fork blades might be a good choice for a criterium bike where good cornering and lateral stiffness are more important.
> > Hugh Thornton
> > Cheshire, England
> >
> > --- On Wed, 24/6/09, Angel Garcia <veronaman@gmail.com> wrote:
> >
> > From: Angel Garcia <veronaman@gmail.com>
> > Subject: [CR] Speaking of round fork blades
> > To: "CLASSIC RENDEZVOUS" <classicrendezvous@bikelist.org>
> > Date: Wednesday, 24 June, 2009, 7:50 PM
> >
> > Does the use of round fork blades fall in the category of "rarely used"? Or,
> > are they more common than that? I gather from Greg's note that Hetchins is
> > known for them. Are there other builders that are regularly identified with
> > round forks?
> >
> > I know dave moulton used them on his Criterium model.
> >
> > Angel Garcia
> > Long Valley, NJ
> >
> >
> > Hi list members. The recent couple of obscure builder information requests
> > reminded me that I have an English frame that I know nothing about. Nor have
> > I been able to discover anything about it on the web. It's a H.R. Daycock
> > frame. The headstock transfer states an address of "Roman Road London E 2".
> > It's built with Nervex pro lugs, and Campy long eyeletted dropouts {the
> > fairly early ones with the extra little hole on the derailleur side}. The
> > number 1312 is faintly stamped on the B.B. shell. It appears to be a nicely
> > built; quite conventional , road frame , The only real departure from normal
> > form is that it uses round fork blades like a Hetchins . I believe it dates
> > from the late 1950's to early 1960's. Can anyone provide any information ?
> >
> > Thanks!
> > Greg Lone
> > Langley B.C.
> > Canada