Re: [CR] Roy Thame Frame (Ian Briggs)

(Example: Component Manufacturers:Chater-Lea)

References: <mailman.24538.1266651058.565.classicrendezvous@bikelist.org> <8CC806FDE4066B4-274C-23A47@webmail-d015.sysops.aol.com>
To: <lemansgtman@aol.com>, <classicrendezvous@bikelist.org>
Date: Sat, 20 Feb 2010 15:24:45 -0500
In-Reply-To: <8CC806FDE4066B4-274C-23A47@webmail-d015.sysops.aol.com>
From: <oroboyz@aol.com>
Subject: Re: [CR] Roy Thame Frame (Ian Briggs)


<<...Putney shop where Roy Thame was the manager - and also of their Pro team*.>>

The adverts read: "The Road to Fame is on a Roy Thame."

Dale Brown Greensboro, North Carolina USA

-----Original Message----- From: lemansgtman@aol.com To: classicrendezvous@bikelist.org Sent: Sat, Feb 20, 2010 1:15 pm Subject: [CR] Roy Thame Frame (Ian Briggs)

Basically this is a Holdworth frame out of their Putney shop where Roy Thame was the manager - and also of their Pro team*.

Some Holdsworths were branded as Thames - but I for one never really understood why anyone wanted to buy one as at the time (early to mid Seventies) the Holdsworth-Campagnolo team* held huge sway on the UK Pro circuit - mostly weekend Crits and Short / Medium distance road races. Les West and Colin Lewis in particular were nearly everyones' heroes.

For that reason most amateur roadies would have bought a Holdsworth (preferably an Orange & Blue Professional) in preference to a 'Thame'. I recall seeing loads for the former - and very few of the latter in the amateur pelotons around London at that time... Nevertheless very nice bits of kit, which I could never afford (!)

Thus any combination of 1970s mid to high end Campag / Cinelli / Brooks Professional or similar would be a suitable set up for your new acquisition.

Look here for guidance:

http://homepage.ntlworld.com/nkilgariff/Proteam.htm

Ian Briggs Luton, Bedfordshire, UK.

_______________________________________________

=