Re: [CR] Vitus 172

(Example: Racing:Wayne Stetina)

From: Peter Rogers <pjrogers@rogers.com>
To: "Mark Bulgier" <Mark@bulgier.net>, <classicrendezvous@bikelist.org>
References: <212488F36B144F6B90F130A9A152BCF5@PeterPC> <9327C3B25BD3C34A8DBC26145D88A9071732C3@hippy.home.here>
In-Reply-To: <9327C3B25BD3C34A8DBC26145D88A9071732C3@hippy.home.here>
Date: Sun, 4 Jul 2010 17:52:52 -0400
Subject: Re: [CR] Vitus 172


Dear Mark, Many thanks for your help.

Reading the archived posts, Vitus 172 tubes seem to have been used on many French bikes of various levels of quality.

I assume that, if the sticker on the frame does not state otherwise, just the three main tubes would be made of 172 and the rest is probably gas pipe. This seems to have been the usual format for mid-level French frames during the seventies.

I do not have the frame yet, so I cannot do a more thorough examination.

All the best, Peter Rogers

Barrie, Ontario, Canada

--------------------------------------------------
From: "Mark Bulgier" <Mark@bulgier.net>
Sent: Sunday, July 04, 2010 5:21 PM
To: "Peter Rogers" <pjrogers@rogers.com>; <classicrendezvous@bikelist.org>
Subject: RE: [CR] Vitus 172


>

> Peter Rogers asked:

>

>> Was the Vitus 172 series a good tube set?

>> Was it available in double-butted and plain gauge?

>> Is it seamless?

>

> My recollection (must be considered unreliable until you get

> confirmation) is that 172 was DB 1.0/0.7mm (same weight as Columbus SP),

> seamless, and some alloy, probably normalized 4130 or similar. It was a

> step up from their Durifort line. I doubt they would have made a

> plain-gauge 172 variant under the same name, but it would be hard to

> prove they never did.

>

> Mark Bulgier

> Seattle, WA USA