Dan- I can't help with the spoke washers but to say that you might need 3 or 4 for each spoke. My Aw alloy shell needed 4 each. As to the QR clip for the cable I'd like to see one too. I've just used two of the knurled lock nuts butted up against each other to set the adjustment point for the cable end barrel to thread up to.
I rode home from work last night with a tail wind that had me spun out in 3rd gear! Last time I went that fast on my 3 speed was in Raleigh, NC a few years ago when a hurricane passed by close and even at my going about 30mph the tail wind was still passing me by.
Spoke Washers
> I'm building up a Sturmey hub recently purchased and the coupling rod and
> chain that attaches to the indicator rod has a quick release connection.
> I don't have the attachment for the quick release that connects to the
> cable for shifting. If anyone can provide the cable attachment for the
> quick release, I'd be grateful.
>
> Also I'm looking for the very small brass washers that slide over the
> spoke elbow to provide extra spacing for the very thin flanges of the
> Sturmey's hub. Please let me know if you might be able to provide them or
> a source that I might purchase them from.
>
> Thanks in advance,
>
> Dan Artley in Parkton, Maryland with some great biking weather (Finally!)
> _______________________________________________
Andrew R Stewart
Rochester, NY