Hi all, I've never seen a date stamping on any of the PISTA cranksets that have been thru my collection...........regards wayne davidson Invers NZ.........
FujiFish1@aol.com wrote:
> I think I remember reading here on the List that Campy pista cranks
> continued to be manufactured in 151 bcd, later than the road cranks which
> switched over to 144 bcd in about 1967. I still have the original cranks from a
> 1973 Paramount track, and they are 151 (no date code, though).
>
> Ciao,
> Mark Agree
> Southfield MI USA
> ~ ~ ~
>
>
>
> Date: Sat, 20 Mar 2010 01:15:02 +0000 (UTC)
> From: joeb-z@comcast.net
> Subject: Re: [CR] Need Correct BCD Info 60's/70's Pog
> To: Jason Osborne _josborne@caneelgroup.com_
> (mailto:josborne@caneelgroup.com)
> <1786266580.3917901269047702994.JavaMail.root@sz0107a.westchester.pa.mail.co
> mcast.net>
>
> Content-Type: text/plain; charset=utf-8
>
> Well you have to figure out 1967 vs 1968 for a starting point and where
> the frame or bike was distributed and if sold as a whole bike or frame and
> what parts were in stock with those distributors at the exact time and if a
> frame, and if the racers liked to put older parts on it ... And track bikies
> were very partial to their collection of 151 rings and had no use for
> anything below 44T etc. As of 1996 I knew a shop near the Blain MN velodrome
> where you could get rings milled to fit either BCD!
>
> By the way I wish I had this dilemma as to how to fit the Pog. And as a
> further aside, there was a Pogliaghi loaner track bike in the trailer at
> Blaine at that time and people know it was cool and no one poached it. Guys
> like John Barron were there, who I presume knew what it was and what better
> purpose than to be at that spectacular track doing its appointed duty. That
> trout just got returned to the stream. For at least a while I presume.
>
> Joe Bender-Zanoni
> Whitneyville, CT
>
>
> ----- Original Message -----
> From: "Jason Osborne" <josborne@caneelgroup.com>
> To: classicrendezvous@bikelist.org
> Sent: Friday, March 19, 2010 8:16:35 PM GMT -05:00 US/Canada Eastern
> Subject: [CR] Need Correct BCD Info 60's/70's Pog
>
> Finally getting around to building up my Pogliaghi Pista serial # 9606
> (For clarification my frame is NOT the f/f for sale on Ebay several weeks ago
> though is similar). Assuming my dating is correct and please if someone
> believes it not to be let me know, I am needing to ascertain what Campy pista
> cranks and chain rings are period correct; 151BCD or 144BCD. Luckily I
> happen to have both on hand.
>
> Jason E. Osborne
> Medford, NJ USA