You could add Colnago to the list. The split-downtube Duall was made by Alan for Colnago, and later the Carbitubo too.
Ray Dobbins
Miami, Florida USA
From: loudeeter@aol.com <loudeeter@aol.com> Subject: Re: [CR] re-badged ALANs To: classicrendezvous@bikelist.org Date: Wednesday, April 14, 2010, 5:08 PM
I can add Bergamin and Nishiki as having rebadged ALAN frames. In the case of Nishiki, it wasn't aluminum or steel though. :0
Lou Deeter, Orlando FL USA
-----Original Message----- From: Harry Travis <travis.harry@gmail.com> To: worthy2@earthlink.net Cc: classicrendezvous@bikelist.org Sent: Wed, Apr 14, 2010 5:00 pm Subject: Re: [CR] re-badged ALANs
Very likely Ciocc; I recall bidding on a frameset that I associated with being Swiss. Methinks there was also a Japanese trading company brand on some, a company well known for quality factory steel frames and builds
For sure the US bike and accessories chain retailer "Performance" distributed frames and may have built bikes where the tubes were said to be a composite glued into Alan lugs and bottom bracket shell, labeled Alan.. (Alum wrapped in fiber?) I bought an "oversized" tube frameset that originated from Performance, but painted, not anodized, and don't know the material, except for the seat stays, which were carbon fiber in clear epoxy.
Harry Travis New Jersey, USA
On Wed, Apr 14, 2010 at 2:20 PM, <worthy2@earthlink.net> wrote:
>
>
>
>
> >Message: 3
> >Date: Wed, 14 Apr 2010 04:22:58 -0700 (PDT)
> >From: Dave from Maine <davefromainetoo@yahoo.com>
> >Subject: Re: [CR] Which companies put their names on ALAN frames?
> >To: classicrendezvous@bikelist.org
> >Message-ID: <471811.20435.qm@web113216.mail.gq1.yahoo.com>
> >Content-Type: text/plain; charset=iso-8859-1
> >
> >Awesome topic - especially since I have a Pagani-labelled Alan.? So far
> we've listed:
> >Pagani
> >Fanini
> >Rolf Wolfshohl ROWONA
> >Gitane
> >Torpado Magniflex
> >Geurciotti
> >Ciscato
> >?
> >Some more seaching last night revealed:
> >Zeus (Wooljersey dot com)
> >Basso (Velospace dot org)
> >Faglum Brothers (?) (Velospace)
> >Gregorad (Velospace)
> >?
> >Any more?
> >Dave Whitney
> >Poland, Maine USA
> Pretty sure I have seen a Concorde and possibly a Ciocc (from the same era)
> that were re-badged ALAN.
> On another topic: if Mark doesn't have the Zefal parts, I used to find them
> from xx-cycles who have a large web-shop in France. They may not have the
> stock they used to, but price and speed were often (surprisingly) quite
> good,
> Alan Goldsworthy
> San Francisco, CA, USA
> _______________________________________________
>
--
Harry Travis