Offered to CR members are some interesting frames and a stack of older NOS parts.
I can take payment a number of ways - Paypal or cheque in GBP, cash sent registered post, Traveller\u2019s cheques in $, direct bank transfer within the UK or European Iban bank transfer. I will always combine shipping in order to reduce costs.
All prices are in UK GBP Frames cost 80 GBP to ship to the USA, 100 GBP to ship to Australia/New Zealand and 11 GBP within the UK.
With the pound being low in value these are a real bargain... for US and European buyers. Paypal is quoting 1.50$ to 1 GBP.
Hilary Stone, Bristol, British Isles
DAVE LLOYD ROAD FRAME c1980 Seat Tube (ctc): 54cm (21.25in) Top Tube (ctc): 52.5cm (20.75in) Rear dropout width: 120mm Wheel size: Sprints/700C (brake drop 50mm) Frame tubing: Probably Reynolds 531SL Seatpost size: 27.2mm This is an exceptionally nice early road frame from Dave Lloyd which probably dates from around 1980 and which I think is built from Reynolds 531SL tubing - it is much lighter than most road frames of the period. The chrome on the head lugs and forks is generally very good but that on the rear stays is not quite as good. The paint is very sound. It will make an excellent road bike - and comes complete with a Stronglight roller bearing headset in very good condition. The Omas BB will not be included as standard - but could be left in for an additional 20 GBP. 175 GBP
http://i141.photobucket.com/
ALLIN ROAD FRAME c1963 Seat Tube (ctt): 58cm (23in) Top Tube (ctc): 57.5cm (22.75in) Rear dropout width: 120mm Wheel size: 27in or 700C (brake drop 60mm) Seatpost size: 27.2mm Frame tubing: Reynolds 531 double butted Allin Cycles were based in Whitehorse road, Croydon for many years, This is a Stan Butler model from around 1963. It is very nicely built but does need repainting. 59 GBP
http://i141.photobucket.com/
HOBBS SUPERBE ROAD FRAME 1947 Beautiful hand cut fancy lugs Seat Tube (ctt): 61cm (24in) Top Tube (ctc): 57cm (22.5in) Rear dropout width: 110mm Wheel size: 26in, Sprints/700C (brake drop 50mm) Seatpost size: 27.2mm Frame Tubing: Reynolds 531 double butted This Hobbs Superbe road frame from 1947 is in its original but rather tatty paint. Hobbs were one of the pioneers in hand cut fancy lugs from before WWII and the Superbe lug pattern was their development of this. This frame is very sound with one or two small and unimportant dents which would be very easily filled during repainting. it may have originally been built for use with 26 x 1 1/4in wheels but it does mean that it is ideal for use with 700C or sprint wheels nowadays which is much more convenient than most frames of the 40s built for 27s and needing deep drop brakes. 135 GBP
http://i141.photobucket.com/
CHATER-LEA SMALL FLANGE FRONT HUB 32H NOS ideal partner for hub gear 35 GBP
http://i141.photobucket.com/
BLUEMELS AIRWEIGHT ALUMINIUM SPEARPOINT EXTENSION NOS NIP 25 GBP
http://i141.photobucket.com/
BLUMFIELD SMALL FLANGE SINGLE FIXED HUBSET 32/40H NOS excellent quality
track hubs from the 40s/50s with felt grease seals 95 GBP
http://i141.photobucket.com/
AIRLITE SMALL FLANGE FRONT HUB 20H NOS NIB - that is not a typo - it is
20H! 38 GBP
http://i141.photobucket.com/
STRONGLIGHT NEEDLE BEARING BOTTOM BRACKET SET NOS NIB for cottered
chainset, so, so rare and special 85 GBP
http://i141.photobucket.com/
CONI MANUAL 1971 This is the classic 1971 manual with lots of beautiful
illustrations of Campagnolo, Simplex Universal, Mafac as well as the
being the best training manual around in the 1970s. The advice it offers
is still pretty valid even today and the section on bike fitting has
been used by many top framebuilders as the basis on which they size
their frames to the rider. This manual was published by CONI (the
Central Sports School of FIAC, the Italian Cycling Federation. It is
rumoured that Cino Cinelli contributed a lot of the text on the
equipment and on bike fit \u2013 this would certainly appear to be the case
as it conforms closely to what he recommended. This copy is in excellent
condition and has been bound into a hardback book - its not ex-library!
49 GBP
http://i141.photobucket.com/
SIMPLEX 543 GEAR LEVER NOS perfect 25 GBP
http://i141.photobucket.com/
RON KITCHING 1960 CATALOGUE in excellent condition 24 GBP
http://i141.photobucket.com/
HARDEN SMALL FLANGE HUBS 32H front, 40H Rear. The front is lightly used
the two rear are NOS one rear is gear sided, the other is single sided
fixed. 225 GBP for all three hubs or 160 GBP for the front and either
one of the rears. I am sorry I will not sell the front on its own.
http://i141.photobucket.com/
FB SMALL FLANGE HUBSET double fixed 32H front, 36H rear NOS 75 GBP
http://i141.photobucket.com/