Re: [CR] Early Campy GS FD bolts

(Example: Production Builders:Peugeot:PY-10)

From: "OBrien, Peter" <Peter.OBrien@agriculture.gov.ie>
To: 'scott davis' <francopedia@yahoo.com>, "'classicrendezvous@bikelist.org'" <classicrendezvous@bikelist.org>
Date: Thu, 13 Jan 2011 11:10:49 +0000
Thread-Topic: [CR] Early Campy GS FD bolts
Thread-Index: Acuxrk287/FcFiw4ShSh++z+EA8MDwBYn+YA
References: <313506.83597.qm@web53805.mail.re2.yahoo.com>
In-Reply-To: <313506.83597.qm@web53805.mail.re2.yahoo.com>
Accept-Language: en-US, en-IE
acceptlanguage: en-US, en-IE
Subject: Re: [CR] Early Campy GS FD bolts


Sorry for posting this to all but I don't have Ted's original Email.

I have one of these derailleurs and found that the screws that come with some computer parts fit, ie. internal hard drives, optical drives etc.. The screws are the same depth and have the broad head required. You could try your local computer or electronics store.

Reagrds

_________________ Peter O'Brien, Wexford Ireland -----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of scott davis Sent: 11 January 2011 16:39 To: classicrendezvous@bikelist.org Subject: Re: [CR] Early Campy GS FD bolts

Hi Ted, I'm not sure if I measured the thread diameter correctly, but I came up with a strange M-4.5 size. And they seem to have an extra fine pitch. You can probably take the body to a good hardware store and try some Metric bolts for fit You might try both an M-4 and M-5 to size up. Scott Davis, Minneapolis, Minnesotasdbicyclegarage.com Original message: I have a first generation Record FD, the one with the two screws which secure the upper and lower cage pivots to the body.? Except mine is missing it's screws.? The screws are part #'s 781 "spina superiore," and 783 "spina inferiore."? They can be seen in Campagnolo Catalog 14 on the page with the Record FD exploded diagram.

Would anybody happen to have a couple of these screws that they could part with?? I would pay for parts and shipping of course.? If you have the screws on a derailleur but need them, how much could I pay you to please give me the exact measurements and threading info of the screws so as I can have a couple of these made?

Ted E. Baer Palo Alto, CA USA

_______________________________________________

Department of Agriculture, Fisheries and Food

The information contained in this email and in any attachments is confidential and is designated solely for the attention and use of the intended recipient(s). This information may be subject to legal and professional privilege. If you are not an intended recipient of this email, you must not use, disclose, copy, distribute or retain this message or any part of it. If you have received this email in error, please notify the sender immediately and delete all copies of this email from your computer system(s).

An Roinn Talmhaíochta, Iascaigh agus Bia

Tá an t-eolais san ríomhphost seo, agus in aon ceangláin leis, faoi phribhléid agus faoi rún agus le h-aghaigh an seolaí amháin. D\u2019fhéadfadh ábhar an seoladh seo bheith faoi phribhléid profisiúnta nó dlíthiúil. Mura tusa an seolaí a bhí beartaithe leis an ríomhphost seo a fháil, tá cosc air, nó aon chuid de, a úsáid, a chóipeál, nó a scaoileadh. Má tháinig sé chugat de bharr dearmad, téigh i dteagmháil leis an seoltóir agus scrios an t-ábhar ó do ríomhaire le do thoil.