[CR] Raleigh Dyna-Tech off topic

(Example: Racing:Jean Robic)

References: <162546.42264.qm@web29516.mail.ird.yahoo.com>
To: ppenwarden@yahoo.co.uk, classicrendezvous@bikelist.org
Date: Sun, 20 Feb 2011 15:25:28 -0500
In-Reply-To: <162546.42264.qm@web29516.mail.ird.yahoo.com>
From: <oroboyz@aol.com>
Subject: [CR] Raleigh Dyna-Tech off topic


Peter,

Back again I just did a little quick research and yes, that bike is at best very late 1980s, most likley 1990s and being bonded with aluminum joints (hard to call them lugs IMO) and various materials steel, ti and aluminum, it is far afield from what we talk about on the CR list.

Sorry, Dale

Dale Brown Greensboro, North Carolina USA http://www.classicrendezvous.com

-----Original Message----- From: Peter Penwarden <ppenwarden@yahoo.co.uk> To: classicrendezvous@bikelist.org Sent: Sun, Feb 20, 2011 2:59 pm Subject: [CR] Re Raleigh Dyna-Tech fracture

Was out on the usual Sunday ride, all was well. Then gears started to misbehave and was aware of tyre touching frame when peddaling hard. Then every time I got out of the saddle on a climb it felt like the brakes were on. Stopped and inspected, the lh chainstay had a crack about 1 inch from the BB shell. I made it home and have now transferred most parts to another frame. My question is, can it be repaired? I have welding facilities but as the frame is bonded am worried the heat will break down the bonding. Was contemplating immersing the BB in water, leaving the crack just above it and welding it. Would I trust it afterwards? Any thoughts would be appreciated.

Peter Bristol UK