Re: [CR] where is my fix? And Peugeot question

(Example: Production Builders:Frejus)

References: <7C7EBAC5-D7D7-49BE-A17B-459AF1382EC0@att.net>
In-Reply-To: <7C7EBAC5-D7D7-49BE-A17B-459AF1382EC0@att.net>
From: "Ted E. Baer" <wickedsky@sbcglobal.net>
Date: Sat, 19 Feb 2011 00:36:12 -0800
To: Jon Spangler <jonswriter@att.net>
Cc: Dale Brown <classicrendezvous@bikelist.org>
Subject: Re: [CR] where is my fix? And Peugeot question


Thanks Jon. You wouldn't happen to know of a source for 1966 Peugeot PX-10 decals would you?

Regards, Ted Baer Palo Alto, CA

Sent from my iPhone

On Feb 19, 2011, at 12:18 AM, Jon Spangler <jonswriter@att.net> wrote:
>
> Message: 11
> Date: Tue, 15 Feb 2011 17:48:05 -0800
> From: Phil Brown <philcycles@sbcglobal.net>
> Subject: Re: [CR] where is my fix? And Peugeot question.
> To: Classic Rendezvous <Classicrendezvous@bikelist.org>
> Message-ID: <9C48735A-EFA2-49F7-93B7-AEC953535771@sbcglobal.net>
> Content-Type: text/plain; charset=us-ascii
>
> Ted,
>
> Peugeot UO-series bikes rode - and still ride - very well. They were among the most nimble and best-handling
> entry-level ten-speeds of their era, which is why they were so popular.
>
> I have upgraded rather than restored my mom's white 1970s UO-18 mixte but I sure as hell recommend riding it.
> Replacing the steel-rimmed original rims alone gives the bike a much nicer (and safer) ride.
>
> If you want to restore it, go right ahead. If you want to ride and enjoy it, a few tasteful modifications (like the ones I did on my UO-8 in 1971)
> will make it a very sweet ride: aluminum rims, a Brooks Pro seat, and a Suntour Cyclone or GT rear derailleur all were oft-recommended upgrades at Collins' Cycle Shop in Eugene, OR.
>
> Jon Spangler
> still in love with Peugeot after all these years in Alameda, CA USA
>
>
>
>
> On Feb 15, 2011, at 10:31 AM, verktyg wrote:
>
>> I guess it depends, if you had special fond memories about an entry level bike like a U08 or had an old one that you've kept for years then on a personal level it might be worth it.
>
>
> I had a good friend who had Cyclart do a full Cat 1 restoration on his UO-8. He's had it from new and it looked beautiful.
> Phil Brown
> Under the good weather today in Oakland, Calif.
>
>
> Message: 7
> Date: Tue, 15 Feb 2011 09:39:51 -0800
> From: "Ted E. Baer" <wickedsky@sbcglobal.net>
> Subject: Re: [CR] where is my fix? And Peugeot question.
> To: Carlos Ovalle <ovalle@charter.net>
> Cc: "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>
> Message-ID: <A5D12F32-6EAB-49EF-83AB-33540D06D571@sbcglobal.net>
> Content-Type: text/plain; charset=us-ascii
>
> The same thing happened to me and the first thing I did was panic. Then I popped a (prescribed) Klonopin and dozed back off. Still no CR mail at 8:45am. Checked the CR archives and noticed mail from today was exchanging hands. At this point I figured I was either "in the cooler" or "booted." So I promptly popped in Russ Meyer's "Faster Pussycat--Kill! Kill!" DVD and watched the wildly wicked and booted Tura Satana (RIP) carve 'round the desert in her sporty 356.
>
> What is the cheapest model Peugeot bicycle anyone should bother putting "proper restoration" time toward? Like is a UO-8 worth a complete and proper restoration? My guess is there is no definitive model as the models we discuss in this forum all seem to be classics.
>
> Ted E. Baer
> Palo Alto, CA USA
>
> ------------------------------