Whether it is inside pull or outside pull is a matter of choice unless a manufacturer's design concern specifies otherwise such as is the case with the disc-side of disc hubs from Shimano for example.
=8-)
Robert Shackelford San Jose, CA USA
Quoting Mark Petry <mark@petry.org>:
> Adding to what Rich posted
>
>
>
> Said rim and hub labels should be read at the same time, in other words,
> when the "Campagnolo" or "Phil" script on the hub is "up" then the label on
> the rim should be at the bottom.
>
>
>
> And wheel lacing should be assymetrical, inside spokes pulling (although I
> build modern wheels the opposite way to get a tiny bit better bracing angle
> on the drive side).
>
>
>
> Endless trivia!
>
>
>
> Mark Petry
>
> Bainbridge Island, WA
> 206 618 9642 <mailto:mark@petry.org> mark@petry.org