Re: [Classicrendezvous] SR front derailleurs

(Example: Framebuilders:Pino Morroni)

Date: Tue, 31 Oct 2000 13:25:35 -0800
From: "Marc Boral" <mbikealive@earthlink.net>
CC: Classicrendezvous@bikelist.org
Subject: Re: [Classicrendezvous] SR front derailleurs
References: <8331856820C5D311A9B600A0C9D5A6F501FEBD2D@splmail.spl.usace.army.mil>


Yes, assuming you have the Campy braze-on fitting. Just pry away the return spring from the pivot post. Use plastic or wood when untensioning/tensioning the spring, that way you won't mar any finished surfaces in case you slip.......and most likely you will slip when tensioning. Also remove the "e clip" from the other pivot post. Then simply reinstall onto the braze-on fitting.

Marc Boral

dcheung@spl.usace.army.mil wrote:
> Hello all,
>
> Can you convert an NR/SR clamp on FD to braze on?
>
> Doland