Re: [CR]Teledyne Titan replacement fork

(Example: Events)

From: <OROBOYZ@aol.com>
Date: Tue, 21 Aug 2001 23:17:52 EDT
Subject: Re: [CR]Teledyne Titan replacement fork
To: SM2501@aol.com, classicrendezvous@bikelist.org


In a message dated 8/21/01 10:19:37 PM Eastern Daylight Time, SM2501@aol.com writes:

<< He would like another ti fork, but I discouraged that. So I suggested having another fork compatible with 27" wheels custom made. But I thought I would see if anybody in the group has a 27" quality fork >>

I can go measure my Teledyne fork but a "27 inch" job is not necessarily what you are looking for. The dimension that you are referring to is the center of the dropouts/front axle to the center of the brake hole.. If memory serves, it should be about 357 mm I think.. ( Richie? Mark? Simianboy?)

Dale Brown
Greensboro, North Carolina