I recently aquired a used pair of older wheels. The rims are Fiamme with the
oval decal and the hubs are Campy low flange one piece alloy. The locking
rings on the rear hub have "cam 61" on them and the fronts have "cam 62 and
60". After taking the axles out to check the races and clean the old grease
I found two different sizes of bearings. The rear bearings were 1/4" and
there were nine in each side. The front hub had 7/32" bearings, also with
nine in each side. Now I've never disassembled a Campy hub before so I'm
unfamiliar with the proper bearing sizes. Are these sizes correct for these
hubs? Also, there are numbers on the cones the rear have 10x26 and the front
have 9x25 or 26 (the numbers are hard to read), what do these stand for?
I would appreciate any help you can give.
thanks,
David Goerndt