[CR]FS: Mavic 631/Phil/ etc


Example: Framebuilders:Dario Pegoretti
From: <MSCTROSE@aol.com>
Date: Sun, 10 Feb 2002 23:01:40 EST
To: classicrendezvous@bikelist.org
Subject: [CR]FS: Mavic 631/Phil/ etc

OK gang, thanks for your patience and Dale for your use of bandwidth, and of course for your patronage. Its almost all gone. I still have some stuff left that needs to move out to finance my new projects, new stuff is listed first:

1. New in Box, NOS, Mavic 631 starfish crank, 170, 42/52, with matching Phil bb but no rings. Crank is new, Phil bb is a 113 with offset, was used on my Heron with another Mavic crank, then sent back to Phil for a rebuild, not used since refurbished, $220 the set

2. new, no box, Suntour superbe Pro 36 hole freewheel hubs, 120 axle with also new Wheels manufacturing chromoly axle and spacers to make a 130 wheel, $90 includes skewers

5. Cinelli 1A stem, 80, with Cinelli 63/40 bars. Nice shape, no crashes, logos look great, but I once put a set of Campy aero levers on bars with bolts that were too long, and there are little circular indents in the area, $45

4. Dura ace freewheel, six speed, 13/24, good shape, 35

5. Suntour Cyclone MK ll front and rear der set, short cage, nib, $40 the set

6. Shimano Dura Ace sidepulls, 7400, pads have little wear but are hard, no barrel adjusters, $50

7. new in bag, Command shifters, seven speed, black, with cables, $40

plus shipping
Mark Rosenberg
San Diego
howtostretch.com