Re: [CR]RE:Mavic BB tapers

(Example: Framebuilders:Bernard Carré)

From: <Philcycles@aol.com>
Date: Thu, 27 Jun 2002 21:09:11 EDT
Subject: Re: [CR]RE:Mavic BB tapers
To: classicrendezvous@bikelist.org


In a message dated 6/27/2 11:29:50 PM, NortonMarg@aol.com writes:
>2) Have a machinist make you a couple of spacers out of good grade aluminum
>
>or stainless steel to keep your chainline where it should be. These can
>be
>touched up to match, if you like, or left "au naturelle".

Not necessary to have them made. Most any LBS has them.
Phil Brown
NoHo, Ca