OK, here we have cranks ONLY, no rings or hardware. These are the old TA style that had covered pedal holes, but the pedal-hole caps are MISSING. These usually popped out when a long-axled pedal got thread in. However, in terms of "accuracy" and "period-correctness", the remaining recessed hole behind the pedal hole is testament to their vintage. The decals on two cranks are damaged and should be replaced (both Bicycle Classics and Harris sell these). The condition of the cranks is excellent with minimal scratching, no visible strap-rub, BUT ... VERY IMPORTANT: on the back of one of the synchronizer cranks, about 1.5 inches up from the pedal hole, is a "cutout" about 1cm wide by 3mm deep. It was milled by someone who knew what he was doing, as it's clean. I have no idea on earth why such a thing would be done, and am eager to hear your speculation on the matter. I imagine it was done to clear something on the left side of the seattube (clamp-on derailleur ?). There's no doubt that this particular crank is weakened by having lost some aluminum. Ride it at your own risk, or seek a replacement. Please keep in mind the other 3 cranks are perfect ! $150 plus shipping
Mario Girasa, Cambridge, MA
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/