Re: [CR]Avocet Parts Questions

(Example: Framebuilding:Tubing)

From: "Charles T. Young" <youngc@NetReach.Net>
To: <classicrendezvous@bikelist.org>
References: <5D7622C111F78A4C8A27817E18BBAEB7013567@mlsswn02p.WAS.INT.IMF.ORG>
Subject: Re: [CR]Avocet Parts Questions
Date: Wed, 18 Sep 2002 20:32:01 -0400

My LBS has a bunch of Avocet cranks for around $35.00. Think they're all silver. He uses them for inexpensive 144mm BCD ring replacement fodder.

I propose we all keep our eyes open for bits for Brandon's project. Probably about as painful as collecting a Galli group in only one color of anodizing but possibly cheaper.

Charlie

Charles T. Young
Honeybrook. PA


----- Original Message -----
From: "Bingham, Wayne R."
To: classicrendezvous@bikelist.org
Sent: Wednesday, September 18, 2002 6:13 PM
Subject: RE: [CR]Avocet Parts Questions



>
> The Monkeyman wrote:
> >>>>OK, I just won a NOS pair of Avocet hubs with the box on Ebay for
> $20 < http://ebay.com/<blah>
> I never expected winning the hubs, but I was the only bidder. What's up
> with that? Sure they're not Weyless, but they're quite nice hubs.
> Anyway, I've always liked their stuff. As I remember they made seats,
> seatposts, hubs, cranks. . .was there anything else? I know the stuff
> was contracted out, so who actually built their stuff?<<<<
>
> I have the same NOS rear hub (in a similar box intended for a pair, but
> the front is missing) that was given to me by a friend a few years ago.
> The hub is actually quite nice. If it were a pair, I probably would
> have done something with it by now. Anyone have a front lying around
> they'd give up? Or does someone need the rear I have? Mine is unhappy
> and needs a mate. I think you got a heck of a deal on those, Mr. Monk!
>
> I'm not sure who made the hubs, but I'm fairly certain that Ofmega made
> the cranksets, and a lot of the stuff was anodized in colors. I have a
> blue Avocet track crank on my fixed-gear, and a red one still in the
> box. Also have a seat post in the box, and agree that the stuff is all
> pretty nice.
>
> Wasn't someone trying to build a bike with a complete Avocet "group" a
> while back? Was the you, Joe B-Z? So far, we've identified seat post,
> hubs, crank, BB, pedals and clips, and I seem to remember headsets as
> well. Don't ever recall derailleurs, but since Ofmega made those too,
> who knows?
>
> Wayne Bingham
> Falls Church VA