Oh nooooo - not this subject again! How do you determine from his post that he's got one that might break? From what I've seen, the no-date arms seem to break less often.
I've never heard of a broken Record 151 Strada crank (excluding the slender 1958 version)..... Has anyone? I suspect Mark has a "chunky" 144, tho'
Regards,
Greg Parker A2 MI USA
> Message: 10
> From: NortonMarg@aol.com
> Date: Sun, 15 Sep 2002 03:40:00 EDT
> Subject: Re: [CR]old Campy crank variation?
> To: classicrendezvous@bikelist.org, FujiFish1@aol.com
>
> In a message dated 9/14/02 10:35:42 PM Pacific Daylight Time,
> FujiFish1@aol.com:
>
> << Second, the cranks have no date code (170 Strada). The rings are 52/48!
> > The arms are different from what I have seen before. The sides of the
> arms
> > have a larger flat face, seemingly caused by smaller bevels between it and
> > the front and back. In addition, the outer diameter of the circle
> > surrounding the pedal hole on these cranks is smaller than any I have seen
> > before. They measure about 31.5 mm, while every other arm I have measures
> > about 33.5. Other sets I measured are: two pre-date code, an 82, and an
> 84.
> > Is there any reason that this set is different? Might they be older? Any
> > ideas about the 52/48 rings? >>
To which Steven replied:
> Can you send a picture? You may have an old variation that tends to break,
> and if so, you may want to move them to the shelf. The rings are for half
> step gearing, I suspect a 151 bolt circle? Measure from the center of the
> ring bolt to the edge of the ring. It's either 7mm or 10mm. 10mm means 151.
> Stevan Thomas
> Alameda, CA