Re: [CR]Holding a vintage bike in a repair stand

(Example: Production Builders:Cinelli)

From: "Tom Martin" <tom@wilsonbike.com>
To: <steve@sburl.com>, <classicrendezvous@bikelist.org>
References: <1d0.b90ee35.2c19e55a@aol.com>
Subject: Re: [CR]Holding a vintage bike in a repair stand
Date: Thu, 12 Jun 2003 09:15:30 -0700


List:

I would not recommend the internal seat tube clamp (ISC-1). I have seen the seat tubes expanded out so much on some frames that the original post no longer clamps in the frame. It's better to use a cheapo alloy post as a dummy in the frame and then clamp it to the repair stand. Park tool now has extensions for all their stands so you don't have to stoop over if you are a giant. The park clamps are bombproof and easily repairable and are in use in every last bike shop in the US- some for 30 years and more. I like the Ultimates too, they have a broader range of adjustment and a good and simple clamp. They are just not vintage enough for me I guess......

Tom Martin Oakland CA No on topic bikes (yet), but I do have on topic tools and stands


----- Original Message -----
From: OROBOYZ@aol.com
To: steve@sburl.com
Sent: Thursday, June 12, 2003 7:16 AM
Subject: [CR]Holding a vintage bike in a repair stand



> In a message dated 6/12/2003 6:28:32 AM Eastern Daylight Time,
> steve@sburl.com writes:
>
> << Those Park shop repair stands have probably wrinkled more seat tubes and
> mangled more decals than any others. They are especially brutal on
> repainted bikes that have not had special curing. When you find yours, be
> sure to invest in Park's attachment that expands inside the seat tube to
> hold the bike. It does not hold the bike as firmly, but it could save you
> from unpleasant surprises. >>
>
> I dislike using that Park inside-the-seat-tube expander tool; it is kind of
> floppy and imprecise, although once installed it works OK, it is often awkward
> to remove. Then as Steve mentions, it is not very stable in use. It tends to
> twist about, risking whacking the frame on the rest of the stand.
>
> It is a lot smarter to just absolutely once and for all, get in the habit of
> NEVER clamping the seat tube or top tube but always clamp the seat post. Even
> if you have to loosen it and extend it to the point where you have enough seat
> post exposed to clamp. Then use a stand which extends up high enough to work
> on the bike at chest level.
>
> To that end, I HIGHLY recommend the Ultimate stand ...over the Park. I sell
> and work with both at CDO. Ultimate makes two models the Pro and the Consumer
> and both are excellent. They can adjust high enough for even Mark Petry and
> have an excellent clamping head. (Ultimate are famous for their sound, lighting
> and stage craft fixtures.)
> http://ultimatesupport.com
>
> Dale Brown
> cycles de ORO, Inc.
> 1410 Mill Street
> Greensboro, North Carolina
> USA 27408
> 336-274-5959
> Fax 336-274-6360
> <A HREF="http://www.cyclesdeoro.com">cyclesdeORO.com</A>
> <A HREF="http://www.classicrendezvous.com/main.htm">Classic Rendezvous</A>