Re: [CR]How can I remove Stronglight dustcaps from a 70's bicycle?

(Example: History:Norris Lockley)

From: <OROBOYZ@aol.com>
Date: Fri, 4 Jul 2003 15:47:04 EDT
Subject: Re: [CR]How can I remove Stronglight dustcaps from a 70's bicycle?
To: Starstryke25@netscape.net, classicrendezvous@bikelist.org


In a message dated 7/4/2003 3:23:27 PM Eastern Daylight Time, Starstryke25@netscape.net writes:

<< I came to the crankset and gave the left dust cap a turn and crap, it stripped the hole where I was supposed to put the allen wrench in.. the same happened with the other side. I was going to pick up some WD40 and hope for the best but I know that is unrealistic. Anyone know any 'abusive' ways of getting rid of those dust caps once and for all? After I get those caps out I've gotta figure out where to buy some NOS ones. >>

Use a drill with a small bit and drill two small opposing side holes in the cap, being careful to not drill too deep nor too far outboard so as to fudge the crank threads. Then, to remove the stuck caps, use an adjustable span pin tool (or make one by grinding the tips of needle nose pliers). Soak stick caps with Kroil first though!!

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina USA 27408 336-274-5959 Fax 336-274-6360 <A HREF="http://www.cyclesdeoro.com">cyclesdeORO.com</A> <A HREF="http://www.classicrendezvous.com/main.htm">Classic Rendezvous</A>