Re: [CR]Cutting a steering tube

(Example: Events:Eroica)

From: <DTSHIFTER@aol.com>
Date: Sat, 5 Jul 2003 13:15:53 EDT
Subject: Re: [CR]Cutting a steering tube
To: Philcycles@aol.com, DTSHIFTER@aol.com, jerrymoos@sbcglobal.net, classicrendezvous@bikelist.org


In a message dated 7/5/03 12:31:10 PM, Philcycles@aol.com writes:

<< All I use is an old steel screwed race as a guide. Then I clean it up with a file, not forgetting to deburr the inside of the steerer. >>

There's the first thing I forgot!! A file....Thanks Phil!

I also have a wire brush on the grinder which cleans up the outside surfaces of the steerer - but you need that file for the inside!!

Cheers,

Chuck Brooks
Malta, NY