[CR]Re:73 Paramount Rims (was Mod E...)

(Example: Production Builders:Teledyne)

From: "Stephen Barner" <steve@sburl.com>
To: <classicrendezvous@bikelist.org>
References: <CATFOODunJVUo78QhQM00000898@catfood.nt.phred.org>
Date: Sun, 19 Sep 2004 13:38:40 -0400
Subject: [CR]Re:73 Paramount Rims (was Mod E...)

Jonathan,

I think your date is premature. I don't recall the Schwinn Approved logo being applied to sewup rims until sometime after '74. Also, I have a '74 P13 that I am quite certain came to me with its original rims and they have the standard foil Mavic decals. I believe you are correct on the S-A rims being Mavics and I think the S-A rims were all smooth-sided. One of the big reasons why Schwinn private-labled their parts was so that they could source equivalent components from multiple manufacturers without noting so in the catalog. Usually there was some variation in the part from the version sold under the manufacturer's label, though such differences were often cosmetic and sometimes for the worse.

Steve Barner, Bolton, Vermont


----- Original Message -----


> Date: Sun, 19 Sep 2004 12:41:32 EDT
> From: Jon3084@aol.com
> To: classicrendezvous@bikelist.org
> Subject: Re: [CR]Re:73 Paramount Rims (was Mod E...)
>
> Jerry,
>
> If you have a p13 it probably would have come with Schwinn Approved 330g
> tubs. I think most of these were Mavic, but the decal was "Schwinn Approved".
>
> Jonathan Greene
> Oviedo FL