RE: [CR]Alan Frame Repair

(Example: Framebuilders:Masi)

Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
Date: Wed, 16 Feb 2005 11:04:23 -0800 (PST)
From: "Derek Willburn" <morganx9@yahoo.com>
Subject: RE: [CR]Alan Frame Repair
To: 'VintageBikes' <classicrendezvous@bikelist.org>
In-Reply-To: <000f01c51438$07f3a7e0$6401a8c0@proto>


Being that it's the dropout, it is probably cast/forged alluminum and not potmetal so it should weld as well as the welder can weld. What I didn't think of is heat effecting the glue for bonding it to the stays. I have a 979 Vitus frame with a crack in the seat lug and would like to know if heat will effect the glue before it is welded.

Derek Willburn
Long Beach, CA


--- chris ioakimedes wrote:


> Is it possible that the alloy in An Alan frame is
> one that does not weld
> easily or well?
>
> Chris Ioakimedes
> http://www.fattiretrading.com
>
>
> -----Original Message-----
> From: classicrendezvous-bounces@bikelist.org
> [mailto:classicrendezvous-bounces@bikelist.org] On
> Behalf Of Derek
> Willburn
> Sent: Tuesday, February 15, 2005 9:42 PM
> To: VintageBikes
> Subject: Re: [CR]Alan Frame Repair
>
> Hi Dave,
> If it's too close to the hole to weld the part back
> on
> then it will probably be best to cut it off a little
> further away on the frame and make a piece out of
> alluminum stock. Any local professional welder
> should
> be able to put it on -needs a TIG welder for this
> job.
> I would make a rough shape first, weld it on, drill
> hole and tap threads for derailleur, then file to
> exact shape. Not sure what the Alan dropout looks
> like
> so you might be able to modify it to take a
> replacement type hanger also.
>
> Stay warm,
> Derek Willburn
> Long Beach, CA
>
> --- Dave from Maine <davefromainetoo@yahoo.com>
> wrote:
>
> > My 70's Alan frame was recently sold to one of my
> > riding buddies, and he just ripped the rear
> > derailleur hanger off. (Not a pretty sight)
> >
> > Aluminum welding? Is this something we'd have to
> > have fabricated and then find a welder who deals
> > with aluminum?
> >
> > At least I got my 7-Eleven Merckx frame finished -
> I
> > think I'll stick to steel.
> >
> > Dave Whitney
> > Portland, Maine
> >
> >
> > _______________________________________________
> > Classicrendezvous mailing list
> > Classicrendezvous@bikelist.org
> >
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - 250MB free storage. Do more. Manage
> less.
> http://info.mail.yahoo.com/mail_250
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>

__________________________________ Do you Yahoo!? The all-new My Yahoo! - What will yours do? http://my.yahoo.com _______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous